http://www.dticorp.com/catalog/honeywell-eg1033ab01-flame-sensor-p-7792.html
Industrial power generation gas turbine installations demand the superior protection provided by the Honeywell UV Flame Monitoring System. The Honeywell flame monitor system detects the ultraviolet radiation emitted by a hydrocarbon flame and produces an output signal to indicate a flame or noflame condition. This system has delivered flawless performance on General Electric (and GE licensee) gas turbines for more than 35 years. The Honeywell system is currently used on gas turbines used for land-based and off-shore power generation, pumping stations, shipboard power generation and various other industrial applications. A variety of sensor types, amplifier types and sensor cable lengths are available.
Tuesday, December 24, 2013
Honeywell C7061A1020 Flame Detector
http://www.dticorp.com/catalog/honeywell-c7061a1020-flame-detector-p-160550.html
Honeywell C7061A1020 Flame Detector, 120 or 230 Vac, Ultraviolet, Purple Peeper, Self-Checking. Dynamic self-checking flame detector used with R7861 Dynamic Self-check Amplifiers for sensing the ultraviolet radiation generated by the combustion of gas, oil, or other fuels.
Features
• Oscillating shutter interrupts ultraviolet radiation reaching the UV sensor to provide the UV sensor tube checking function.
• Can be mounted horizontally, vertically or at any angle in between.
• The detector requires faceplate alignment and has integral locating reference points to assure proper operation of the shutter mechanism.
• Field replaceable ultraviolet sensing tube and quartz viewing window.
• Models with threaded conduit fitting and color-coded leadwires allow rapid electrical installation.
• C7061A1038 or A1046 5 pin Brad Harrison type (formally 41307N) mating connector not supplied nor available through Honeywell.
• Two detectors can be wired in parallel to reduce nuisance shutdowns in difficult flame sighting applications.
• Protective heat block built into mounting flange.
• -40 F (-40 C) rated ultraviolet sensing tube is supplied.
• C7061E meets NEMA 4 standards with viewing window rated to 20 psi.
• C7061F has an explosion-proof housing for use in hazardous atmospheres with a viewing window rated to 100 psi.
Honeywell C7061A1020 Flame Detector, 120 or 230 Vac, Ultraviolet, Purple Peeper, Self-Checking. Dynamic self-checking flame detector used with R7861 Dynamic Self-check Amplifiers for sensing the ultraviolet radiation generated by the combustion of gas, oil, or other fuels.
Features
• Oscillating shutter interrupts ultraviolet radiation reaching the UV sensor to provide the UV sensor tube checking function.
• Can be mounted horizontally, vertically or at any angle in between.
• The detector requires faceplate alignment and has integral locating reference points to assure proper operation of the shutter mechanism.
• Field replaceable ultraviolet sensing tube and quartz viewing window.
• Models with threaded conduit fitting and color-coded leadwires allow rapid electrical installation.
• C7061A1038 or A1046 5 pin Brad Harrison type (formally 41307N) mating connector not supplied nor available through Honeywell.
• Two detectors can be wired in parallel to reduce nuisance shutdowns in difficult flame sighting applications.
• Protective heat block built into mounting flange.
• -40 F (-40 C) rated ultraviolet sensing tube is supplied.
• C7061E meets NEMA 4 standards with viewing window rated to 20 psi.
• C7061F has an explosion-proof housing for use in hazardous atmospheres with a viewing window rated to 100 psi.
HONEYWELL MS7520A2007 (0)2-10Vdc,Floating Actuator
http://www.dticorp.com/catalog/honeywell-ms7520a2007-0210vdcfloating-actuator-p-3745.html
HONEYWELL MS7520A2007 (0)2-10Vdc,Floating Actuator - 175 lb-in, Spring Return , 24 Vac +/-20%, 50 Hz, 60 Hz. The S20 Spring Return Direct Coupled Actuators (DCA) are used within heating, ventilating, and air-conditioning (HVAC) systems. They can drive a variety of quarter-turn, final control elements requiring spring return fail-safe operation. Applications include volume control dampers, mounted directly to the drive shaft or remotely (with the use of accessory hardware), quarter-turn rotary valves, such as ball or butterfly valves mounted directly to the drive shaft, and linear stroke globe or cage valves mounted with linkages to provide linear actuation.
Features
• Brushless DC submotor with electronic stall protection for floating/modulating models.
• Brush DC submotor with electronic stall protection for 2-position models.
• Self-centering shaft adapter (shaft coupling) for wide range of shaft sizes.
• Models available for use with two-position, single pole single throw (spst), line- (Series 40) or low- (Series 80) voltage controls.
• Models available for use with floating or switched single-pole, double-throw (spdt) (Series 60) controls.
• Models available for use with proportional current or voltage (Series 70) controls.
• Models available with combined floating/modulating control in a single device.
• Models available with adjustable zero and span.
• Models available with line-voltage internal end switches.
• Access cover to facilitate connectivity.
• Access cover to facilitate connectivity.
• Metal housing with built-in mechanical end limits.
• Spring return direction field-selectable.
• Shaft position indicator and scale.
• Manual winding capability with locking function.
• UL (cUL) listed and CE compliant.
• All Models are plenum-rated per UL873.
HONEYWELL MS7520A2007 (0)2-10Vdc,Floating Actuator - 175 lb-in, Spring Return , 24 Vac +/-20%, 50 Hz, 60 Hz. The S20 Spring Return Direct Coupled Actuators (DCA) are used within heating, ventilating, and air-conditioning (HVAC) systems. They can drive a variety of quarter-turn, final control elements requiring spring return fail-safe operation. Applications include volume control dampers, mounted directly to the drive shaft or remotely (with the use of accessory hardware), quarter-turn rotary valves, such as ball or butterfly valves mounted directly to the drive shaft, and linear stroke globe or cage valves mounted with linkages to provide linear actuation.
Features
• Brushless DC submotor with electronic stall protection for floating/modulating models.
• Brush DC submotor with electronic stall protection for 2-position models.
• Self-centering shaft adapter (shaft coupling) for wide range of shaft sizes.
• Models available for use with two-position, single pole single throw (spst), line- (Series 40) or low- (Series 80) voltage controls.
• Models available for use with floating or switched single-pole, double-throw (spdt) (Series 60) controls.
• Models available for use with proportional current or voltage (Series 70) controls.
• Models available with combined floating/modulating control in a single device.
• Models available with adjustable zero and span.
• Models available with line-voltage internal end switches.
• Access cover to facilitate connectivity.
• Access cover to facilitate connectivity.
• Metal housing with built-in mechanical end limits.
• Spring return direction field-selectable.
• Shaft position indicator and scale.
• Manual winding capability with locking function.
• UL (cUL) listed and CE compliant.
• All Models are plenum-rated per UL873.
HONEYWELL W973B1016 Logic Panel
http://www.dticorp.com/catalog/honeywell-w973b1016-logic-panel-p-1249.html
HONEYWELL W973B1016 Logic Panel (use with T7067 and Q667), Stages 3 Heat/3 Cool. Control heating, cooling and economizer operation in commercial air conditioning and heat pump equipment.
Features
• Proven, reliable temperature control.
• Many flexible versions to meet your application needs.
• Panels can be used with staged gas, oil, or electric heat; modulating gas, hot water, or steam heat; and direct expansion or modulating chilled water cooling.
• Control up to 3 on-off heat or cool stages or up to 10 on-off heat and/or cool stages using W975 Satellite Sequencers.
• Modulating dc current signal controls economizer heating or cooling valve motors.
• T7067 Dual Set Point Thermostat/Transmitter located in controlled space provides heating and cooling input signal based on space demand.
• C7046A sensor located in discharge air duct provides heating/cooling anticipation and economizer modulating low limit signal.
• System cycles all stages off on power interruption.
• When power is restored, system sequences required stages on with timed inter-stage delay.
HONEYWELL W973B1016 Logic Panel (use with T7067 and Q667), Stages 3 Heat/3 Cool. Control heating, cooling and economizer operation in commercial air conditioning and heat pump equipment.
Features
• Proven, reliable temperature control.
• Many flexible versions to meet your application needs.
• Panels can be used with staged gas, oil, or electric heat; modulating gas, hot water, or steam heat; and direct expansion or modulating chilled water cooling.
• Control up to 3 on-off heat or cool stages or up to 10 on-off heat and/or cool stages using W975 Satellite Sequencers.
• Modulating dc current signal controls economizer heating or cooling valve motors.
• T7067 Dual Set Point Thermostat/Transmitter located in controlled space provides heating and cooling input signal based on space demand.
• C7046A sensor located in discharge air duct provides heating/cooling anticipation and economizer modulating low limit signal.
• System cycles all stages off on power interruption.
• When power is restored, system sequences required stages on with timed inter-stage delay.
Honeywell S7810M1003 ControlBus Module-MODBUS
http://www.dticorp.com/catalog/honeywell-s7810m1003-controlbus-modulemodbus-p-36502.html
Honeywell S7810M1003 ControlBus Module-MODBUS. S7810M ModBus Module operates as ModBus RTU slave device.
Features
• Provides ability to remotely mount the S7800 Keyboard Display Module.
• Installs directly on the front of 7800 SERIES Relay Modules.
• Provides ModBus communications bus interface.
• Remote reset.
Product Specifications
• Application: ControlBus(tm) Module-MODBUS
• Voltage; 13 Vdc peak fullwave rectified (+20/-15%).
• Vibration: 0.5 G environment
• Ambient Temperature Range (F): -40 F to +140 F
• Ambient Temperature Range (C): -40 C to +60 C
• Dimensions (in.): 4 27/32 in. wide x 2 29/32 in. high x 29/32 in. deep
• Dimensions (mm): 123 mm wide x 73 mm high x 23 mm deep
• Weight (lb); 4 oz
• Weight (kg): 0.11 kg
• Approvals, Underwriters Laboratories Inc; Component Recognized, File No. MP268; Guide No. MCCZ2.
• Approvals, Canadian Standards Association: Certified, File No. LR95329-3.
• Approvals, Factory Mutual: Report No. 1V9AO.AF.
• Comments: Includes 208727 8 pin electrical connector
Honeywell S7810M1003 ControlBus Module-MODBUS. S7810M ModBus Module operates as ModBus RTU slave device.
Features
• Provides ability to remotely mount the S7800 Keyboard Display Module.
• Installs directly on the front of 7800 SERIES Relay Modules.
• Provides ModBus communications bus interface.
• Remote reset.
Product Specifications
• Application: ControlBus(tm) Module-MODBUS
• Voltage; 13 Vdc peak fullwave rectified (+20/-15%).
• Vibration: 0.5 G environment
• Ambient Temperature Range (F): -40 F to +140 F
• Ambient Temperature Range (C): -40 C to +60 C
• Dimensions (in.): 4 27/32 in. wide x 2 29/32 in. high x 29/32 in. deep
• Dimensions (mm): 123 mm wide x 73 mm high x 23 mm deep
• Weight (lb); 4 oz
• Weight (kg): 0.11 kg
• Approvals, Underwriters Laboratories Inc; Component Recognized, File No. MP268; Guide No. MCCZ2.
• Approvals, Canadian Standards Association: Certified, File No. LR95329-3.
• Approvals, Factory Mutual: Report No. 1V9AO.AF.
• Comments: Includes 208727 8 pin electrical connector
HONEYWELL C7600A1002 Humidity Sensor
http://www.dticorp.com/catalog/honeywell-c7600a1002-humidity-sensor-p-3356.html
HONEYWELL C7600A1002 Duct or Wall mounted Solid State Humidity Sensor. Used with any controller capable of processing a 4-20 mA or 2-10 Vdc signal.
Features
• Provide humidity sensing through a long-lasting thick-film capacitive polyimide sensing element that is both accurate and stable over time.
• Vents in top cover provide for airflow to humidity sensing element inside.
• Mounts easily because of compact size and lightweight construction.
• Remains operational after exposure to all outdoor air humidity extremes. 5% RH accuracy from 30% to 70% RH
HONEYWELL C7600A1002 Duct or Wall mounted Solid State Humidity Sensor. Used with any controller capable of processing a 4-20 mA or 2-10 Vdc signal.
Features
• Provide humidity sensing through a long-lasting thick-film capacitive polyimide sensing element that is both accurate and stable over time.
• Vents in top cover provide for airflow to humidity sensing element inside.
• Mounts easily because of compact size and lightweight construction.
• Remains operational after exposure to all outdoor air humidity extremes. 5% RH accuracy from 30% to 70% RH
Honeywell H7635C2015 Humidity Transmitter
http://www.dticorp.com/catalog/honeywell-h7635c2015-humidity-transmitter-p-36306.html
Honeywell H7635C2015 Humidity Transmitter, 3% RH accuracy, outdoor mount, with optional 20K ohm temp output. The H7625, H7635, and H7655 are highly accurate, stable humidity transducers designed for use with HVAC controllers such as the T7350 Thermostat, T775U Remote Humidity Controller, and W7760 Direct Digital Controllers. The Ceramic Technology humidity sensor is not affected by condensation and provides excellent long-term stability.
Features
• Ceramic Technology overcomes the limitations of other resistance based humidity sensors that use water soluble polymer coatings.
• Ceramic Technology allows sensors to recover fully from condensation, fog, and high humidity.
• Highly accurate, repeatable, stable output with negligible hysteresis.
• Temperature compensated output.
• Zero and span trimmers, and increment/decrement recalibration feature.
• All units have selectable 4-20 mA, 0-10 Vdc, or 0-5 Vdc output. NIST traceable 2%, 3%, and 5% calibration, every sensor calibrated at 3 different points.
• All humidity sensors use the same enclosure as the T7770 sensor, except the H7655A, which uses the T7047-like enclosure.
Product Specifications
• Application: Humidity and Temperature
• Application Type: Outdoor mount
• Operating Humidity Range (% RH): 0 to 95% RH non-condensing
• Accuracy (% RH): ± 3% from 20-95% RH
• Humidity Output: 4-20mA, 0-5Vdc, or 0-10Vdc selectable
• Temperature Output: 20K ohm NTC
• Voltage Supply: 18 – 40 VDC / 18 - 28 VAC
• Operating Temperature Range (F): -10 to 140°F
• Operating Temperature Range (C): 23 to 60°C
• Shipping Temperature Range (F): -40 to 160°F
• Shipping Temperature Range (C): -40 to 71°C
• Dimensions (in.): 4 9/16 in. high, 3 in. wide, 7/8 in. deep
• Dimensions (mm): 116 mm high, 76.5 mm wide, 22 mm deep
• Used With: Excel 15, Excel 10, T7350,
• Relativity Humidity Measurement Range: 0 to 100% RH
Honeywell H7635C2015 Humidity Transmitter, 3% RH accuracy, outdoor mount, with optional 20K ohm temp output. The H7625, H7635, and H7655 are highly accurate, stable humidity transducers designed for use with HVAC controllers such as the T7350 Thermostat, T775U Remote Humidity Controller, and W7760 Direct Digital Controllers. The Ceramic Technology humidity sensor is not affected by condensation and provides excellent long-term stability.
Features
• Ceramic Technology overcomes the limitations of other resistance based humidity sensors that use water soluble polymer coatings.
• Ceramic Technology allows sensors to recover fully from condensation, fog, and high humidity.
• Highly accurate, repeatable, stable output with negligible hysteresis.
• Temperature compensated output.
• Zero and span trimmers, and increment/decrement recalibration feature.
• All units have selectable 4-20 mA, 0-10 Vdc, or 0-5 Vdc output. NIST traceable 2%, 3%, and 5% calibration, every sensor calibrated at 3 different points.
• All humidity sensors use the same enclosure as the T7770 sensor, except the H7655A, which uses the T7047-like enclosure.
Product Specifications
• Application: Humidity and Temperature
• Application Type: Outdoor mount
• Operating Humidity Range (% RH): 0 to 95% RH non-condensing
• Accuracy (% RH): ± 3% from 20-95% RH
• Humidity Output: 4-20mA, 0-5Vdc, or 0-10Vdc selectable
• Temperature Output: 20K ohm NTC
• Voltage Supply: 18 – 40 VDC / 18 - 28 VAC
• Operating Temperature Range (F): -10 to 140°F
• Operating Temperature Range (C): 23 to 60°C
• Shipping Temperature Range (F): -40 to 160°F
• Shipping Temperature Range (C): -40 to 71°C
• Dimensions (in.): 4 9/16 in. high, 3 in. wide, 7/8 in. deep
• Dimensions (mm): 116 mm high, 76.5 mm wide, 22 mm deep
• Used With: Excel 15, Excel 10, T7350,
• Relativity Humidity Measurement Range: 0 to 100% RH
HONEYWELL S7800A1068 Keyboard Display-Spanish
http://www.dticorp.com/catalog/honeywell-s7800a1068-keyboard-displayspanish-p-7966.html
HONEYWELL S7800A1068 Keyboard Display-Spanish. Provides current status of burner sequence, timing information, hold information and lockout information, as well as selectable or preemptive messages.
Features
• Application flexibility.
• Communication interface capability with Switchover to ModBus programmable.
• First-out annunciation and system diagnostics provided by 2 row by 20 column Vacuum Fluorescent Display (VFD).
• S7800A1001 offers "Call Service" (Business Card)programmable message displayed when system lockout occurs.
• S7800A1001 series 5 and greater has selectable ModBus Feature.
• Local or remote annunciation of operation and fault information.
• First out expanded annunciation with 24 limit and interlock LEDs enhances keyboard display module information. Display can be Programmed to customize the expanded annunciator messages to the system. Provides burner controller data.
• Remote reset.
• Report generation.
HONEYWELL S7800A1068 Keyboard Display-Spanish. Provides current status of burner sequence, timing information, hold information and lockout information, as well as selectable or preemptive messages.
Features
• Application flexibility.
• Communication interface capability with Switchover to ModBus programmable.
• First-out annunciation and system diagnostics provided by 2 row by 20 column Vacuum Fluorescent Display (VFD).
• S7800A1001 offers "Call Service" (Business Card)programmable message displayed when system lockout occurs.
• S7800A1001 series 5 and greater has selectable ModBus Feature.
• Local or remote annunciation of operation and fault information.
• First out expanded annunciation with 24 limit and interlock LEDs enhances keyboard display module information. Display can be Programmed to customize the expanded annunciator messages to the system. Provides burner controller data.
• Remote reset.
• Report generation.
Honeywell W7220-PCMOD Tool
http://www.dticorp.com/catalog/honeywell-w7220pcmod-tool-p-160602.html
Honeywell W7220-PCMOD PC interface module. Honeywell's W7220-PCMOD is an integrated tool and software program created to assist in energy savings, validation and verification of the operation of the economizer in a rooftop unit.
Honeywell's W7220-PCMOD tool and software is used with the JADE™ economizer to provide a low-cost, simple-to-use information and logging solution for light commercial buildings. It saves time for the service technician by providing the ability to perform various checkout functions and adjust controller module settings using a personal computer in the field.
In addition, W7220-PCMOD allows contractor personnel to pre-configure a number of JADE controllers in the office, therefore saving the installation technicians time on the rooftop.
The W7220-PCMOD logging option for long term recording allows building owners and contractors to verify energy savings and validate that the economizer system is working.
Components required for set up include:
• A personal computer, with Windows XP, Windows 7 or Windows Vista
• A USB cable to connect the PC Module to the computer (provided)
• Two wires to connect the PC Module to the JADE controller module
• Free W7220-PCMOD software is available for download at www.customer.honeywell.com/economizertools. Please use the password "password" to download the tool.
Features:
• Description: W7220-PCMOD interface module used with JADE (W7220A1000) and Personal Computer
• Output: USB connection to a personal computer
• Input: Sylk bus communication to JADE (W7220A1000)
• Voltage: 12-30 VAC
• Frequency: 60 Hz/50Hz
• Operating Temperature Range (F): -40 F to -150 F
• Operating Temperature Range (C): -40 C to +65 C
• Color: Gray
• Operating Humidity Range (% RH): 5 to 95% RH, non-condensing
• Dimensions (in.): 4.98 inches high x 6.3 inches wide x 1.34 inches deep
• Dimensions (mm): 126.4 mm high x 160 mm wide x 34mm deep
• Approvals, Underwriters Laboratories Inc: FCC Compliant
• Approvals, Underwriters Laboratories Inc: UL94-5V
• Approvals, Underwriters Laboratories Inc: CE
• Approvals, Underwriters Laboratories Inc: C-tick
• Approvals, Others: Complies with California Title 24
• Used With: JADE (W7220A1000)
PC Interface Module Installation Instructions:
1. Download PC tool software to your desktop. For instructions contact your local distributor or Honeywell hot line at 888-516-9347
2. Connect W7220-PCMOD interface module to your computer
3. Power the Sylk device
4. Start configuration tool
5. Choose a correct port on your computer:
• Press Windows key and the Pause key at the same time
• Click Device Manager that appears on the left side of the screen (if using Windows XP the System properties window will appear, click on hardware then device manager)
• Click Ports from Device window pop up
• Choose Com port: TUSB3410
Honeywell W7220-PCMOD PC interface module. Honeywell's W7220-PCMOD is an integrated tool and software program created to assist in energy savings, validation and verification of the operation of the economizer in a rooftop unit.
Honeywell's W7220-PCMOD tool and software is used with the JADE™ economizer to provide a low-cost, simple-to-use information and logging solution for light commercial buildings. It saves time for the service technician by providing the ability to perform various checkout functions and adjust controller module settings using a personal computer in the field.
In addition, W7220-PCMOD allows contractor personnel to pre-configure a number of JADE controllers in the office, therefore saving the installation technicians time on the rooftop.
The W7220-PCMOD logging option for long term recording allows building owners and contractors to verify energy savings and validate that the economizer system is working.
Components required for set up include:
• A personal computer, with Windows XP, Windows 7 or Windows Vista
• A USB cable to connect the PC Module to the computer (provided)
• Two wires to connect the PC Module to the JADE controller module
• Free W7220-PCMOD software is available for download at www.customer.honeywell.com/economizertools. Please use the password "password" to download the tool.
Features:
• Description: W7220-PCMOD interface module used with JADE (W7220A1000) and Personal Computer
• Output: USB connection to a personal computer
• Input: Sylk bus communication to JADE (W7220A1000)
• Voltage: 12-30 VAC
• Frequency: 60 Hz/50Hz
• Operating Temperature Range (F): -40 F to -150 F
• Operating Temperature Range (C): -40 C to +65 C
• Color: Gray
• Operating Humidity Range (% RH): 5 to 95% RH, non-condensing
• Dimensions (in.): 4.98 inches high x 6.3 inches wide x 1.34 inches deep
• Dimensions (mm): 126.4 mm high x 160 mm wide x 34mm deep
• Approvals, Underwriters Laboratories Inc: FCC Compliant
• Approvals, Underwriters Laboratories Inc: UL94-5V
• Approvals, Underwriters Laboratories Inc: CE
• Approvals, Underwriters Laboratories Inc: C-tick
• Approvals, Others: Complies with California Title 24
• Used With: JADE (W7220A1000)
PC Interface Module Installation Instructions:
1. Download PC tool software to your desktop. For instructions contact your local distributor or Honeywell hot line at 888-516-9347
2. Connect W7220-PCMOD interface module to your computer
3. Power the Sylk device
4. Start configuration tool
5. Choose a correct port on your computer:
• Press Windows key and the Pause key at the same time
• Click Device Manager that appears on the left side of the screen (if using Windows XP the System properties window will appear, click on hardware then device manager)
• Click Ports from Device window pop up
• Choose Com port: TUSB3410
Subscribe to:
Posts (Atom)
