Fort Lauderdale, FL
- Popular online
HVAC retailer
DtiCorp.com is introducing the brand new Honeywell
MF020-1-LC3 High Temperature Oxygen Sensor. High temperature oxygen
sensors determine oxygen concentration in air or inert gas mixtures and
transmit values via a 4-20mA output signal. Available in 3 probe lengths and 2
02 partial pressure ranges, from 0.1 vol% 02 to 25 vol%02, or 100 vol%02.
- Popular online
HVAC retailer
DtiCorp.com is introducing the brand new Honeywell
MF020-1-LC3 High Temperature Oxygen Sensor. High temperature oxygen
sensors determine oxygen concentration in air or inert gas mixtures and
transmit values via a 4-20mA output signal. Available in 3 probe lengths and 2
02 partial pressure ranges, from 0.1 vol% 02 to 25 vol%02, or 100 vol%02.
The MF020 Series High Temperature Oxygen Sensors is designed
to determine the oxygen concentration in air or inert gas mixtures with
temperatures of -100 °C to 400 °C [-148 °F to 752 °F] max.
to determine the oxygen concentration in air or inert gas mixtures with
temperatures of -100 °C to 400 °C [-148 °F to 752 °F] max.
These products are particularly
suitable for measuring oxygen in areas that are not easily accessible, or in
closed systems. The MF010 and MF020 Series may both be supplied with a
measuring range of 0.1 vol%O2 to 25 vol%O2 and 0.1 vol%O2 to 100 vol%O2. The
entire measurement range is linear for both series.
suitable for measuring oxygen in areas that are not easily accessible, or in
closed systems. The MF010 and MF020 Series may both be supplied with a
measuring range of 0.1 vol%O2 to 25 vol%O2 and 0.1 vol%O2 to 100 vol%O2. The
entire measurement range is linear for both series.
The sensor detects the gas mixture’s
oxygen partial pressure (absolute oxygen content) by using a dynamic process
that occurs on two zirconium dioxide discs which form a hermetically sealed
chamber. Because no chemical substances are used, the sensor exhibits significantly
longer service life than an electrochemical sensor.
oxygen partial pressure (absolute oxygen content) by using a dynamic process
that occurs on two zirconium dioxide discs which form a hermetically sealed
chamber. Because no chemical substances are used, the sensor exhibits significantly
longer service life than an electrochemical sensor.
The actual oxygen sensor is mounted
in the tip of the bar probe and is protected by a stainless-steel sintered disk
which serves as a flame back-flash stop. The water-proof plastic housing accommodates
the electronics and is mechanically connected to the bar probe
in the tip of the bar probe and is protected by a stainless-steel sintered disk
which serves as a flame back-flash stop. The water-proof plastic housing accommodates
the electronics and is mechanically connected to the bar probe
Features:
- No moving parts.
- Low power consumption.
- No need for temperature
stabilization.
stabilization.
- Functional testing and
calibration in ambient air.
calibration in ambient air.
- Long life.
- 4-20mA output.
- 24Vdc supply voltage.
Sensor electronics include:
- Signal amplifier
- Control for the ionic pump with
an analog component
an analog component
- Test component
- Internal monitoring logic
component
component
- Power supply for the sensor
heating element and the analog and digital components
heating element and the analog and digital components
- Reset
- Voltage monitor
- Analog output
- Bi-directional digital output
- Internal potentiometer
The sensor outputs the measured
values via an analog channel (4 mA to 20 mA or 0 V to 10 V) and a digital
channel (also provides any error signals) which are evaluated and further
processed in a user-specified external mounting device such as a fuel
controller, display, measuring instrument, programmable logic controller or
ventilation system.
values via an analog channel (4 mA to 20 mA or 0 V to 10 V) and a digital
channel (also provides any error signals) which are evaluated and further
processed in a user-specified external mounting device such as a fuel
controller, display, measuring instrument, programmable logic controller or
ventilation system.
About Us: DtiCorp.Com
carries more than 35,000 HVAC products, including industrial,
commercial and residential parts and equipment from Honeywell, Johnson
Controls, Robertshaw, Jandy, Armstrong and more. Our online catalog is easy to
navigate and search, and all products have a picture and a description. If a
customer has any questions about a product, they can call and speak with one of
our product experts. Our mission is to offer the best prices anywhere to our
customers.
carries more than 35,000 HVAC products, including industrial,
commercial and residential parts and equipment from Honeywell, Johnson
Controls, Robertshaw, Jandy, Armstrong and more. Our online catalog is easy to
navigate and search, and all products have a picture and a description. If a
customer has any questions about a product, they can call and speak with one of
our product experts. Our mission is to offer the best prices anywhere to our
customers.
More information
about Honeywell MF020-1-LC3 High Temperature Oxygen Sensor:
about Honeywell MF020-1-LC3 High Temperature Oxygen Sensor:
