DtiCorp.com Is
Introducing The New Honeywell LG1093AA36 Gas Turbine Flame Monitoring System
DtiCorp.com is pleased to announce the
introduction of the new Honeywell LG1093AA36 Gas Turbine Flame Monitoring
System.
Fort
Lauderdale, FL - Popular HVAC online retailer DtiCorp.com is introducing the brand new Honeywell LG1093AA36 gas turbine flame monitoring system.
The Honeywell
Flame Monitor System is designed to detect ultraviolet radiation
emitted by a hydrocarbon flame. A system consists of two sensors, LG1093, and
one amplifier EG1033. The amplifier drives the sensors and provides an output
for flame detection.
This
system has delivered proven performance on General Electric (and GE licensee)
gas turbines for more than 35 years.
Each
amplifier will power up to two sensors. The dimensions are 6.62 x 4.25 x 2.32
inches for the EG1033AA and 6.62 x 4.25 x 4.44 inches for the EG1033AB, AC and
AD. The amplifiers are mounted through four .20 diameter holes 6.00 x 2.00
inches apart.
The
sensors operate at 350 Vdc which is supplied by the amplifier. The sensors
respond to ultraviolet light with a spectral range of 1850 to 2650 angstroms.
The LG1093AA sensor has a 3/4 NPT internal thread provided for attachment to the
burner and a one inch external conduit thread for attachment to electrical
conduit. The sensors are equipped with an internal 511 ohm, 2 watt wire wound
current limiting resistor.
The
LG1093AB, AC sensor housing has a 1.73 inch O.D. by .14 inch wide flange to
clamp the sensor to the burner. The LG1093AB has a two pin connector and the
LG1093AC has a two conductor armored cable provided for connection to the
control panel. These sensors are equipped with internal 511 ohm, 2 watt wire
wound resistor in series with a diode for current limit and reverse polarity
protection.
Specifications:
- Geiger
Mueller-type sensor phototube. Detects UV radiation in the 180 - 260nm range of
the spectrum. Solar blind and tolerant to black body radiation.
- Two-year
shelf-life, 10000h MTBF with over one billion (109) operating hours.
- Gas
Turbines for power genaration and compressors
-
Temperature range:
- Operating 30°F to 131°F
- Storage -65°F to 140°F
- High
sensitivity with fast Flame Present Response Time (0.1 sec typical)
- Flame
Loss Response Time: 0.2 sec max.
-
Amplifiers support multiple voltage requirements: 28 Vdc, 20-35 Vdc and 115
Vac.
-
Operating distances up to 330m (1000ft), sensor to amplifier.
-
Qualified component on General Electric turbines.
-
Available with European Directive CE mark for EMC 89/336/EEC, LVD 73/23/EEC and
ATEX Explosive Atmosphere 94/9/EC (EEx d IIA T3 or EEX d IIC T3, Zone 1 and 2).
-
Available with Factory Mutual approval for explosive atmospheres (Class I, Div
1 and 2, Groups B, C and D).
Flame Sensor with 3/4 inch internal NPT
mounting and Teflon shielded cable with 1" external conduit thread.
Viewing window rated for 10bar (150psi).
Model:
Cable length 61ft (12.8m)
Approvals:
CE/ATEX (EEx d IIA T3)
European Certification: The Flame Ultraviolet products
Amplifiers EG1033AA, EG1033AC and EG1033AD along with Sensor LG1093AA meet
Electromagnetic Compatibility Directive 89/336/EEC and Low Voltage Directive
73/23/EEC. The following Flame Ultraviolet sensors comply with European
Directive 94/9/EC.
- Sensors LG1093AA34, 35 and 36 for marking
code II 2G EEx d IIA T3.
- Sensors LG1093AA44, 45 and 46 for marking
code II 2G EEx d IIC T3.
Special Certifications: The LG1093AA is Factory Mutual
explosion proof tested to Class I Divisions I and 2, Groups B, C, and D.
LG1093 Flame Sensor
Characteristics
About Us: DtiCorp.Com
carries more than 35,000 HVAC products, including
industrial, commercial and residential parts and equipment from Honeywell,
Johnson Controls, Robertshaw, Jandy, Armstrong and more. Our online catalog is
easy to navigate and search, and all products have a picture and a description.
If a customer has any questions about a product, they can call and speak with
one of our product experts. Our mission is to offer the best prices anywhere to
our customers.
More
information about Honeywell LG1093AA36:
Tags:
Honeywell LG1093AA36,
Gas Turbine Flame Monitoring System, Flame Monitoring System
