23 New Honeywell Flame Detectors From DtiCorp.com

Fort Lauderdale, FL – Popular Honeywell online retailer DtiCorp.com (http://www.DtiCorp.com) is introducing 23 brand new Honeywell Flame Detectors. The combustion flames of most carbon-based fuels emit sufficient ultraviolet radiation to enable the C7024 Solid State Purple Peeper Ultraviolet Flame Detector to prove flame presence in a combustion chamber. The detector is mounted outside the combustion chamber. Its mounting flange or union is threaded to one end of a sight pipe inserted through the wall of the combustion chamber. The ultraviolet sensing tube in the flame detector sights the flame through the pipe. When a flame is present, the UV tube in the C7024 senses the ultraviolet radiation emitted. The C7024 produces a signal that is sent to the amplifier in the flame safeguard control. The amplified signal pulls in the flame relay in the control to allow proper operation of the system. Because it is necessary for the UV sensing tube to actually see the flame, it is best to locate the detector as close to the flame as physical arrangement, temperature, and other restrictions permit.

Features:

- Use with R7824C Dynamic Self-Check Flame Signal Amplifier.


- Circuitry provides low power consumption and high reliability.

- Mount horizontally, vertically or at any angle in between.

- Field-replaceable UV radiation sensing tube and quartz viewing window.

- Quick electrical installation with threaded conduit fitting and color-coded leadwires.

- Reduce nuisance shutdowns by wiring two in parallel.

- Oscillating shutter interrupts UV radiation using the R7824C amplifier.

- C7024E meets NEMA 4 standards with viewing window rated to 20 psi.


- C7024F has an explosion-proof housing for use in hazardous atmospheres with a viewing window rated to 100 psi.

Specifications:

- Ambient Temperature Ratings (outside the case): C7024E,F: -20° F to +175° F (-29° C to +79° C).

- Storage Temperature Ratings: -60° F to +175° F (-51° C to +79° C).

- Housing: Violet, cast aluminum cover; mounting flange with heat block and faceplate are separate to provide heat insulation and sealoff. Meets NEMA 4 enclosure requirements (indoor, outdoor protection; rain-tight, dust-tight, hose-directed water).

- Mounting: Mounting flange with 3/4 inch NPT internal threads for attachment to sight pipe.

- Wiring Connections: NEC Class 1 color-coded lead-wires, 8 feet (2.4 meters) long.

- Serviceability C7024E and F: Field replaceable viewing windows and ultraviolet sensing tube, self-checking coil and shutter assembly.


- Approvals: For use in hazardous locations; Class 1, Groups C and D; Class 2, Groups E, F and G; File no. E34649; Canadian Standards Association Certified.

Models Available:

- C7024 Solid State Purple Peeper Ultraviolet Flame Detector.

24 Vdc solid state electronic flame detectors for sensing the ultraviolet radiation emitted by the combustion of most carbon containing fuels, such as natural gas, LP gases, and oil.

1. C7024E1001 24 Vdc Flame Sensor, Ultraviolet, Purple Peeper, Self-Checking, 24 Vdc

2. C7024F1009 24 Vdc Flame Sensor, Ultraviolet, Purple Peeper, Self-Checking, Explosion Proof, 24 Vdc

- C7027 Minipeeper Ultraviolet Flame Detector

Compact Flame Detector for use with flame safeguard controls with ultraviolet amplifiers.

3. C7027A1023 Flame Sensor, Ultraviolet, Minipeeper

4. C7027A1031 Flame Sensor, Ultraviolet, Minipeeper

5. C7027A1049 Flame Sensor, Ultraviolet, Minipeeper

6. C7027A1056 Flame Sensor, Ultraviolet, Minipeeper

7. C7027A1064 Flame Sensor, Ultraviolet, Minipeeper

8. C7027A1072 Flame Sensor, Ultraviolet, Minipeeper

9. C7027A1080 Flame Sensor, Ultraviolet, Minipeeper

10. C7027A1114 Flame Sensor, Ultraviolet, Minipeeper

- C7035 Minipeeper Ultraviolet Flame Detector

Compact flame detector for use with flame safeguard controls with ultraviolet amplifiers.

11. C7035A1023 Flame Sensor, Ultraviolet, Minipeeper

12. C7035A1031 Flame Sensor, Ultraviolet, Minipeeper

13. C7035A1049 Flame Sensor, Ultraviolet, Minipeeper

14. C7035A1056 Flame Sensor, Ultraviolet, Minipeeper

15. C7035A1064 Flame Sensor, Ultraviolet, Minipeeper

16. C7035A1080 Flame Sensor, Ultraviolet, Minipeeper

- C7044 Minipeeper® Ultraviolet Flame Detectors

Compact flame detector for use with flame safeguard controls with ultraviolet amplifiers.

17. C7044A1006 Flame Sensor, Ultraviolet, Minipeeper

- C7927 Solid State Ultraviolet Flame Detector

The Solid State Ultraviolet Flame Detectors detect the ultraviolet radiation emmited by combustion flames. The flame detectors are used with Honeywell flame safeguard controls to provide flame supervision for gas, oil, or combination gas-oil burners.

18. C7927A1016 Electronic Ultraviolet Flame Detector

- C7961 Ultraviolet Flame Detector

A self-checking flame detector using a solid state UV sensor to detect ultraviolet radiation in flames for supervision of gas, oil or combination gas-oil burners.

19. C7961E1006 Dynamic Self-checking Solid State Sensor Ultraviolet Flame Detector

20. C7961E1022 Dynamic Self-checking Solid State Sensor Ultraviolet Flame Detector

21. C7961F1004 120 Vac Dynamic Self-checking Ultraviolet Flame Detector

- C7962 Visible Light Flame Detector

The C7962B Visible Light Flame Detector detects the visible light emitted by fuel oil combustion flames. The C7962B Detector is used with Honeywell Flame Safeguard controls to provide fuel oil flame supervision in commercial and industrial burners.

22. C7962B1002 Visible Light Flame Detector

23. C7962B1010 Visible Light Flame Detector

About Us: DtiCorp.Com (http://www.DtiCorp.com) carries more than 35,000 HVAC products, including industrial, commercial and residential parts and equipment from Honeywell, Johnson Contols, Robertshaw, Jandy, Grundfos, Armstrong and more. Our online catalog is easy to navigate and search, and all products have a picture and a description. If a customer has any questions about a product, they can call 800-757-5999 and speak with one of our product experts. Our mission is to offer the best prices anywhere to our customers.

Julian Arhire

Manager DtiCorp.com

Phone: 954.298.2515

Fax: 954.206.0767

Web: http://www.DtiCorp.com

DtiCorp.com Is Introducing 21 Honeywell V4055 Fluid Actuators

Fort Lauderdale, FL – Popular Honeywell online retailer DtiCorp.com (http://www.DtiCorp.com) is introducing 21 brand new Honeywell V4055A,B,D,E Fluid Actuators. The Honeywell V4055 Gas Valve Actuator, in combination with a VE5000, V5055 or V5097 Gas Valve, controls the gas supply to commercial and industrial burners. When replacing a V4034 with a V4055, the V5034 gas valve must also be replaced with a V5055 or V5097 gas valve. The Honeywell V4055 Actuator, when used with the VE5000a, V5097 or V5055 Valve, is rated for final safety shutoff service.

Features:

- Use where smooth light off is important.


- One-second maximum closing time.

- Continuously displays the valve position with a red indicator when open and a yellow indicator when closed.

- Mount in any position directly to valve bonnet with three setscrews.

- Provide final safety shutoff service when used with V5055 or V5097 Gas Valves.

- Fast opening time of 13 seconds at 120 V, 60 Hz.

- Maximum closing time, is 1 second, which meets approval body requirements.

- Unit available with FM approved proof of closure switch.

- Red “OPEN” indicator attached to the actuator piston will show if the valve is even slightly open; yellow “SHUT” indicator on the valve stem will show only when the gas valve is fully closed.

- Ambient temperature rating of -40°F to +150°F (-40°C to +66°C).


- Valve and actuator may be mounted in any position.

- Optional, field-adjustable, spdt auxiliary switch, rated at 112 hp (0.37 kW), may be added in the field.

- Standard enclosure meets NEMA 1 (IP30) general purpose requirements.

- Red light indicates when valve is ready to open.

- Rocker switch allows manual operation of valve.

- Valve closes on power loss.

Specifications:

- The V4055 Actuator can be used with the characterized guide model of the V5055 or V5097 Gas Valve to enhance lightoff smoothness.

- The standard model has an opening time of 26 seconds at 60 Hz or 32 seconds at 50 Hz. A fastopening


model is available with timings of 13 seconds at 60 Hz or 16 seconds at 50 Hz.

- Maximum closing time is one second, which meets code, standard and insurer requirements.

- Models available with damper shaft, with or without spring return; shaft extends out both sides and rides in Teflon-like Delrin bushings; used with standard 7616BR Damper Crank Arm.

- Red OPEN indicator attached to actuator stem shows when valve is even slightly open; yellow SHUT

indicator on valve stem shows only when gas valve is fully closed.

- Models available with adjustable max flow limit switch.

- Ambient temperature rating is -40°F to +150°F (-40°C to +66°C) for 60 Hz models and -10°F to +158°F (-23°C to +70°C) for 50 Hz and 50/60 Hz models.

- Valve and actuator combinations can be mounted in any position, with the exception of the 220 to 240 Vac, 50/60 Hz models, which are mounted vertically.

- Models available with factory-installed single pole double throw (spdt) field-adjustable Auxiliary Switch. Field-addable Auxiliary Switch kits are also available.


- Standard enclosure meets NEMA 1 (IP30) requirements; models available with NEMA 4 (IP54)

weatherproof enclosure.

- V4055D and high pressure V4055E with Proof-of-Closure Switch and V5055/V5097C or E with valve seal overtravel interlock (double seal) to meet specific code, standard and insurer requirements.

- VE5000 is a European manufactured and approved valve for European use only.

Models available:

1. V4055A1007 Low pressure ON-OFF actuator normally used with V5055/V5097A,B valve bodies

2. V4055A1031 Low pressure ON-OFF actuator normally used with V5055/V5097A,B valve bodies

3. V4055A1064 Low pressure ON-OFF actuator normally used with V5055/V5097A,B valve bodies

4. V4055A1080 Low pressure ON-OFF actuator normally used with V5055/V5097A,B valve bodies

5. V4055A1098 Low pressure ON-OFF actuator normally used with V5055/V5097A,B valve bodies

6. V4055A1114 Low pressure ON-OFF actuator normally used with V5055/V5097A,B valve bodies

7. V4055A1189 Low pressure ON-OFF actuator normally used with V5055/V5097A,B valve bodies

8. V4055A1296 Low pressure ON-OFF actuator normally used with V5055/V5097A,B valve bodies

9. V4055A1304 Low pressure ON-OFF actuator normally used with V5055/V5097A,B valve bodies

10. V4055A1312 Low pressure ON-OFF actuator normally used with V5055/V5097A,B valve bodies

11. V4055B1021 High pressure ON-OFF actuator normally used with 4 in. V5055/V5097A,B and all V5055D valve bodies

12. V4055B1039 High pressure ON-OFF actuator normally used with 4 in. V5055/V5097A,B and all V5055D valve bodies

13. V4055B1088 High pressure ON-OFF actuator normally used with 4 in. V5055/V5097A,B and all V5055D valve bodies

14. V4055D1001 ON-OFF actuator with Proof of Closure normally used on V5055C/V5907C valve bodies(Low pressure )

15. V4055D1019 ON-OFF actuator with Proof of Closure normally used on V5055C/V5907C valve bodies(Low pressure )

16. V4055D1027 ON-OFF actuator with Proof of Closure normally used on V5055C/V5907C valve bodies(Low pressure )

17. V4055D1035 ON-OFF actuator with Proof of Closure normally used on V5055C/V5907C valve bodies(Low pressure )

18. V4055D1043 ON-OFF actuator with Proof of Closure normally used on V5055C/V5907C valve bodies(Low pressure )

19. V4055E1016 ON-OFF actuator with Proof of Closure normally used on V5055C/V5907C valve bodies (High Pressure )

20. V4055E1024 ON-OFF actuator with Proof of Closure normally used on V5055C/V5907C valve bodies (High Pressure )

21. V4055E1040 ON-OFF actuator with Proof of Closure normally used on V5055C/V5907C valve bodies (High Pressure )

About Us: DtiCorp.Com (http://www.DtiCorp.com) carries more than 35,000 HVAC products, including industrial, commercial and residential parts and equipment from Honeywell, Johnson Contols, Robertshaw, Jandy, Grundfos, Armstrong and more. Our online catalog is easy to navigate and search, and all products have a picture and a description. If a customer has any questions about a product, they can call 800-757-5999 and speak with one of our product experts. Our mission is to offer the best prices anywhere to our customers.

Julian Arhire

Manager DtiCorp.com

Phone: 954.484.2929


Fax: 954.206.0767

Web: http://www.DtiCorp.com

New Honeywell HVAC Warranty Policy From DtiCorp.com

Fort Lauderdale, FL – Popular Honeywell online retailer DtiCorp.com (http://www.DtiCorp.com) is introducing the new Honeywell HVAC Warranty Policy. HVAC (Heating, Ventilating, and Air Conditioning) refers to technology of indoor environmental comfort. HVAC system design is a major subdiscipline of mechanical engineering, based on the principles of thermodynamics, fluid mechanics, and heat transfer. Refrigeration is sometimes added to the field’s abbreviation as HVAC&R or HVACR, or ventilating is dropped as in HACR (such as the designation of HACR-rated circuit breakers).

General

Honeywell warrants all new products to be free from defects due to workmanship or materials, under normal use and service, for the following warranty periods. Honeywell VisionPRO®, Commercial VisionPRO™, FocusPRO®, PRO 4000, PRO 3000, LineVolt™ PRO, Digital Round™, and Modern Round ™ (T87K, N) Series Thermostats with a date code of 0501 or later: sixty (60) months from date of installation. CommercialPRO, PRO 2000 and PRO 1000 thermostats: twenty-four (24) months from date of installation. All other Honeywell thermostats and thermostats with a date code of 0452 or earlier: twelve (12) months from date of installation, unless specified otherwise. Honeywell Air Cleaners, Humidifiers, Ventilators, Ultraviolet Treatment and Zoning Products with a date code of 0501 or later, excluding replacement maintenance parts: sixty (60) months from date of installation. Indoor air quality parts F50, F52, F300, F200, F150, UV100E, HE225, HE265, HE365, with date codes of 0452 or earlier, excluding replacement maintenance parts: sixty (60) months from date of installation. All other Honeywell indoor air quality and zoning products with a date code of 0452 or earlier: twenty-four (24) months from date of installation, unless specified otherwise. Variable frequency drive devices (VFD) and accessories: new products for thirty-six (36) months and factory refurbished drives for twelve (12) months from date of installation when start-up and commissioning is performed by Honeywell VFD Authorized and trained personnel. All VFD warranty return products must have prior authorization (Form No. 87-0284) and be returned only to the VFD Service Center in Chattanooga, TN. MS, MN and Fact Acting 2-position Direct Coupled Actuators: sixty (60) months from date of installation. The warranty period for all other products is twelve (12) months from date of installation. If a product is defective due to workmanship or materials, is removed within the applicable warranty period, and is returned to Honeywell in accordance with the procedure described below, Honeywell will, at its option, either repair, replace or credit the customer for the purchase price of the product, in accordance with the procedure described below. This warranty extends only to persons or organizations who purchase products for resale. The expressed warranty above constitutes the entire warranty of Honeywell with respect to the products in the catalog and IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL HONEYWELL BE RESPONSIBLE FOR ANY CONSEQUENTIAL DAMAGES OF ANY NATURE WHATSOEVER.

INSTRUCTIONS – INSTALLING OR SERVICING CONTRACTOR OR DEALER

When replacing a Honeywell product under warranty, including those products furnished on original heating and/or cooling equipment, you should rely on your local Honeywell Wholesaler or Distributor for prompt and efficient product replacement service.A Honeywell Returned Goods Identification Tag (form 87-0030) or an electronic data notification system must be completed and approved by the servicing dealer/contractor prior to submitting the product to the Honeywell Wholesaler or Distributor. (Tags may be obtained from the Wholesaler or Distributor in advance.) No warranty claim for product replacement or credit will be honored by the Wholesaler/Distributor without a completed warranty tag attached or electronic notification.

INSTRUCTIONS – WHOLESALER OR DISTRIBUTOR

The following will apply to the return of any product to Honeywell under the warranty. Any products which are not variable frequency drives and are:

(i) identified with Honeywell’s Returned Goods Identification Tag (form 87-0030), or electronic notification system;

(ii) are listed individually with Returned Goods ID Tag numbers and date codes listed on Honeywell’s Returned Goods Order (form 71-96024) or a similar form;

(iii) packed separately from other returns and protected from shipping damage;


(iv) have certification by the installer or servicing dealer that the product was removed, due to failure, within the applicable warranty period;

(v) are received transportation pre-paid at:

Honeywell Return Goods

Dock 4 MN10-3860

1885 Douglas Drive

Golden Valley, MN 55422

(vi) and are found by Honeywell’s inspection to be defective in workmanship or materials under normal use and service will be handled in accordance with one of the two following procedures, as specified by the customer making the return: All VFD warranty return products must have prior authorization (Form No. 87-0284) and be returned only to the VFD Service Center in Chattanooga, TN.

1. CREDIT PROCEDURE. Honeywell will issue credit, at Honeywell’s lowest wholesaler net price in effect at the time of the return (as set forth on Honeywell’s then current price sheet) or at the actual invoice amount if a copy of that invoice is attached to the packing list. (TRADELINE Replacement Exchange Products will be at Honeywell’s lowest replacement exchange net price in effect at the time Honeywell’s then current price sheet.) Honeywell reserves the right to disallow this credit option in cases of warranty abuse.


2. REPAIR OR REPLACEMENT PROCEDURE. Honeywell will, at its option, either repair or replace the product free of charge and return it or its replacement lowest cost transportation prepaid. The replacement will be a functionally equivalent new TRADELINE product. Premium transportation will be used at customer’s request and expense.

The warranty will not be honored if:

(i) product is damaged or missing parts or accessory items including batteries.

(ii) product exhibits evidence of field misapplications.

Final disposition of any warranty claim will be determined solely by Honeywell. If inspection by Honeywell does not disclose any defect covered by the warranty, the product will be returned or scrapped as instructed by the customer and Honeywell’s regular service charges will apply. Products returned to the customer may be sent shipping charges collect. If you have any questions relative to product returns to Honeywell, contact your Customer Care Representative:


Honeywell International Inc.

Customer Care MN10-1461

1985 Douglas Drive

Golden Valley, MN 55422

(763) 954-5720

INSTRUCTIONS – INDUSTRIAL USERS AND BUILDING OWNERS

As a user, when you purchase a Honeywell product you should expect performance from the product and, if it fails, replacement of the product by the installing dealer. Typically, you will have purchased a Honeywell product under the following circumstances:


1. To modernize or refurbish your existing commercial and/or process control system.

2. You have purchased new commercial and/or process heating, cooling, air cleaning or humidification equipment that is furnished with Honeywell controls or components

3. A control has failed on your existing commercial and/or process heating and/or cooling equipment and is replaced by a Honeywell TRADELINE product.

With few exceptions, you utilize the services of a competent plumbing, heating and/or cooling dealer/contractor for new or replacement work performed. Although the warranty does not extend to you, Honeywell does extend a warranty to your supplier. Your supplier can rely on its local Honeywell Wholesaler/Distributor or Honeywell for prompt replacement. If you have any questions, need additional information or would like to comment on Honeywell’s products or services, please write or phone:

Honeywell International Inc.


Customer Care MN10-1461

1985 Douglas Drive North

Golden Valley, MN 55422-4386

(763) 954-5720

About Us: DtiCorp.Com (http://www.DtiCorp.com) carries more than 35,000 HVAC products, including industrial, commercial and residential parts and equipment from Honeywell, Johnson Contols, Robertshaw, Jandy, Grundfos, Armstrong and more. Our online catalog is easy to navigate and search, and all products have a picture and a description. If a customer has any questions about a product, they can call 800-757-5999 and speak with one of our product experts. Our mission is to offer the best prices anywhere to our customers.

Julian Arhire

Manager DtiCorp.com


Phone: 954.484.2929

Fax: 954.206.0767

Web: http://www.DtiCorp.com