23 New Honeywell Flame Detectors From DtiCorp.com

Fort Lauderdale, FL – Popular Honeywell online retailer DtiCorp.com (http://www.DtiCorp.com) is introducing 23 brand new Honeywell Flame Detectors. The combustion flames of most carbon-based fuels emit sufficient ultraviolet radiation to enable the C7024 Solid State Purple Peeper Ultraviolet Flame Detector to prove flame presence in a combustion chamber. The detector is mounted outside the combustion chamber. Its mounting flange or union is threaded to one end of a sight pipe inserted through the wall of the combustion chamber. The ultraviolet sensing tube in the flame detector sights the flame through the pipe. When a flame is present, the UV tube in the C7024 senses the ultraviolet radiation emitted. The C7024 produces a signal that is sent to the amplifier in the flame safeguard control. The amplified signal pulls in the flame relay in the control to allow proper operation of the system. Because it is necessary for the UV sensing tube to actually see the flame, it is best to locate the detector as close to the flame as physical arrangement, temperature, and other restrictions permit.

Features:

- Use with R7824C Dynamic Self-Check Flame Signal Amplifier.


- Circuitry provides low power consumption and high reliability.

- Mount horizontally, vertically or at any angle in between.

- Field-replaceable UV radiation sensing tube and quartz viewing window.

- Quick electrical installation with threaded conduit fitting and color-coded leadwires.

- Reduce nuisance shutdowns by wiring two in parallel.

- Oscillating shutter interrupts UV radiation using the R7824C amplifier.

- C7024E meets NEMA 4 standards with viewing window rated to 20 psi.


- C7024F has an explosion-proof housing for use in hazardous atmospheres with a viewing window rated to 100 psi.

Specifications:

- Ambient Temperature Ratings (outside the case): C7024E,F: -20° F to +175° F (-29° C to +79° C).

- Storage Temperature Ratings: -60° F to +175° F (-51° C to +79° C).

- Housing: Violet, cast aluminum cover; mounting flange with heat block and faceplate are separate to provide heat insulation and sealoff. Meets NEMA 4 enclosure requirements (indoor, outdoor protection; rain-tight, dust-tight, hose-directed water).

- Mounting: Mounting flange with 3/4 inch NPT internal threads for attachment to sight pipe.

- Wiring Connections: NEC Class 1 color-coded lead-wires, 8 feet (2.4 meters) long.

- Serviceability C7024E and F: Field replaceable viewing windows and ultraviolet sensing tube, self-checking coil and shutter assembly.


- Approvals: For use in hazardous locations; Class 1, Groups C and D; Class 2, Groups E, F and G; File no. E34649; Canadian Standards Association Certified.

Models Available:

- C7024 Solid State Purple Peeper Ultraviolet Flame Detector.

24 Vdc solid state electronic flame detectors for sensing the ultraviolet radiation emitted by the combustion of most carbon containing fuels, such as natural gas, LP gases, and oil.

1. C7024E1001 24 Vdc Flame Sensor, Ultraviolet, Purple Peeper, Self-Checking, 24 Vdc

2. C7024F1009 24 Vdc Flame Sensor, Ultraviolet, Purple Peeper, Self-Checking, Explosion Proof, 24 Vdc

- C7027 Minipeeper Ultraviolet Flame Detector

Compact Flame Detector for use with flame safeguard controls with ultraviolet amplifiers.

3. C7027A1023 Flame Sensor, Ultraviolet, Minipeeper

4. C7027A1031 Flame Sensor, Ultraviolet, Minipeeper

5. C7027A1049 Flame Sensor, Ultraviolet, Minipeeper

6. C7027A1056 Flame Sensor, Ultraviolet, Minipeeper

7. C7027A1064 Flame Sensor, Ultraviolet, Minipeeper

8. C7027A1072 Flame Sensor, Ultraviolet, Minipeeper

9. C7027A1080 Flame Sensor, Ultraviolet, Minipeeper

10. C7027A1114 Flame Sensor, Ultraviolet, Minipeeper

- C7035 Minipeeper Ultraviolet Flame Detector

Compact flame detector for use with flame safeguard controls with ultraviolet amplifiers.

11. C7035A1023 Flame Sensor, Ultraviolet, Minipeeper

12. C7035A1031 Flame Sensor, Ultraviolet, Minipeeper

13. C7035A1049 Flame Sensor, Ultraviolet, Minipeeper

14. C7035A1056 Flame Sensor, Ultraviolet, Minipeeper

15. C7035A1064 Flame Sensor, Ultraviolet, Minipeeper

16. C7035A1080 Flame Sensor, Ultraviolet, Minipeeper

- C7044 Minipeeper® Ultraviolet Flame Detectors

Compact flame detector for use with flame safeguard controls with ultraviolet amplifiers.

17. C7044A1006 Flame Sensor, Ultraviolet, Minipeeper

- C7927 Solid State Ultraviolet Flame Detector

The Solid State Ultraviolet Flame Detectors detect the ultraviolet radiation emmited by combustion flames. The flame detectors are used with Honeywell flame safeguard controls to provide flame supervision for gas, oil, or combination gas-oil burners.

18. C7927A1016 Electronic Ultraviolet Flame Detector

- C7961 Ultraviolet Flame Detector

A self-checking flame detector using a solid state UV sensor to detect ultraviolet radiation in flames for supervision of gas, oil or combination gas-oil burners.

19. C7961E1006 Dynamic Self-checking Solid State Sensor Ultraviolet Flame Detector

20. C7961E1022 Dynamic Self-checking Solid State Sensor Ultraviolet Flame Detector

21. C7961F1004 120 Vac Dynamic Self-checking Ultraviolet Flame Detector

- C7962 Visible Light Flame Detector

The C7962B Visible Light Flame Detector detects the visible light emitted by fuel oil combustion flames. The C7962B Detector is used with Honeywell Flame Safeguard controls to provide fuel oil flame supervision in commercial and industrial burners.

22. C7962B1002 Visible Light Flame Detector

23. C7962B1010 Visible Light Flame Detector

About Us: DtiCorp.Com (http://www.DtiCorp.com) carries more than 35,000 HVAC products, including industrial, commercial and residential parts and equipment from Honeywell, Johnson Contols, Robertshaw, Jandy, Grundfos, Armstrong and more. Our online catalog is easy to navigate and search, and all products have a picture and a description. If a customer has any questions about a product, they can call 800-757-5999 and speak with one of our product experts. Our mission is to offer the best prices anywhere to our customers.

Julian Arhire

Manager DtiCorp.com

Phone: 954.298.2515

Fax: 954.206.0767

Web: http://www.DtiCorp.com

DtiCorp.com Is Introducing 21 Honeywell V4055 Fluid Actuators

Fort Lauderdale, FL – Popular Honeywell online retailer DtiCorp.com (http://www.DtiCorp.com) is introducing 21 brand new Honeywell V4055A,B,D,E Fluid Actuators. The Honeywell V4055 Gas Valve Actuator, in combination with a VE5000, V5055 or V5097 Gas Valve, controls the gas supply to commercial and industrial burners. When replacing a V4034 with a V4055, the V5034 gas valve must also be replaced with a V5055 or V5097 gas valve. The Honeywell V4055 Actuator, when used with the VE5000a, V5097 or V5055 Valve, is rated for final safety shutoff service.

Features:

- Use where smooth light off is important.


- One-second maximum closing time.

- Continuously displays the valve position with a red indicator when open and a yellow indicator when closed.

- Mount in any position directly to valve bonnet with three setscrews.

- Provide final safety shutoff service when used with V5055 or V5097 Gas Valves.

- Fast opening time of 13 seconds at 120 V, 60 Hz.

- Maximum closing time, is 1 second, which meets approval body requirements.

- Unit available with FM approved proof of closure switch.

- Red “OPEN” indicator attached to the actuator piston will show if the valve is even slightly open; yellow “SHUT” indicator on the valve stem will show only when the gas valve is fully closed.

- Ambient temperature rating of -40°F to +150°F (-40°C to +66°C).


- Valve and actuator may be mounted in any position.

- Optional, field-adjustable, spdt auxiliary switch, rated at 112 hp (0.37 kW), may be added in the field.

- Standard enclosure meets NEMA 1 (IP30) general purpose requirements.

- Red light indicates when valve is ready to open.

- Rocker switch allows manual operation of valve.

- Valve closes on power loss.

Specifications:

- The V4055 Actuator can be used with the characterized guide model of the V5055 or V5097 Gas Valve to enhance lightoff smoothness.

- The standard model has an opening time of 26 seconds at 60 Hz or 32 seconds at 50 Hz. A fastopening


model is available with timings of 13 seconds at 60 Hz or 16 seconds at 50 Hz.

- Maximum closing time is one second, which meets code, standard and insurer requirements.

- Models available with damper shaft, with or without spring return; shaft extends out both sides and rides in Teflon-like Delrin bushings; used with standard 7616BR Damper Crank Arm.

- Red OPEN indicator attached to actuator stem shows when valve is even slightly open; yellow SHUT

indicator on valve stem shows only when gas valve is fully closed.

- Models available with adjustable max flow limit switch.

- Ambient temperature rating is -40°F to +150°F (-40°C to +66°C) for 60 Hz models and -10°F to +158°F (-23°C to +70°C) for 50 Hz and 50/60 Hz models.

- Valve and actuator combinations can be mounted in any position, with the exception of the 220 to 240 Vac, 50/60 Hz models, which are mounted vertically.

- Models available with factory-installed single pole double throw (spdt) field-adjustable Auxiliary Switch. Field-addable Auxiliary Switch kits are also available.


- Standard enclosure meets NEMA 1 (IP30) requirements; models available with NEMA 4 (IP54)

weatherproof enclosure.

- V4055D and high pressure V4055E with Proof-of-Closure Switch and V5055/V5097C or E with valve seal overtravel interlock (double seal) to meet specific code, standard and insurer requirements.

- VE5000 is a European manufactured and approved valve for European use only.

Models available:

1. V4055A1007 Low pressure ON-OFF actuator normally used with V5055/V5097A,B valve bodies

2. V4055A1031 Low pressure ON-OFF actuator normally used with V5055/V5097A,B valve bodies

3. V4055A1064 Low pressure ON-OFF actuator normally used with V5055/V5097A,B valve bodies

4. V4055A1080 Low pressure ON-OFF actuator normally used with V5055/V5097A,B valve bodies

5. V4055A1098 Low pressure ON-OFF actuator normally used with V5055/V5097A,B valve bodies

6. V4055A1114 Low pressure ON-OFF actuator normally used with V5055/V5097A,B valve bodies

7. V4055A1189 Low pressure ON-OFF actuator normally used with V5055/V5097A,B valve bodies

8. V4055A1296 Low pressure ON-OFF actuator normally used with V5055/V5097A,B valve bodies

9. V4055A1304 Low pressure ON-OFF actuator normally used with V5055/V5097A,B valve bodies

10. V4055A1312 Low pressure ON-OFF actuator normally used with V5055/V5097A,B valve bodies

11. V4055B1021 High pressure ON-OFF actuator normally used with 4 in. V5055/V5097A,B and all V5055D valve bodies

12. V4055B1039 High pressure ON-OFF actuator normally used with 4 in. V5055/V5097A,B and all V5055D valve bodies

13. V4055B1088 High pressure ON-OFF actuator normally used with 4 in. V5055/V5097A,B and all V5055D valve bodies

14. V4055D1001 ON-OFF actuator with Proof of Closure normally used on V5055C/V5907C valve bodies(Low pressure )

15. V4055D1019 ON-OFF actuator with Proof of Closure normally used on V5055C/V5907C valve bodies(Low pressure )

16. V4055D1027 ON-OFF actuator with Proof of Closure normally used on V5055C/V5907C valve bodies(Low pressure )

17. V4055D1035 ON-OFF actuator with Proof of Closure normally used on V5055C/V5907C valve bodies(Low pressure )

18. V4055D1043 ON-OFF actuator with Proof of Closure normally used on V5055C/V5907C valve bodies(Low pressure )

19. V4055E1016 ON-OFF actuator with Proof of Closure normally used on V5055C/V5907C valve bodies (High Pressure )

20. V4055E1024 ON-OFF actuator with Proof of Closure normally used on V5055C/V5907C valve bodies (High Pressure )

21. V4055E1040 ON-OFF actuator with Proof of Closure normally used on V5055C/V5907C valve bodies (High Pressure )

About Us: DtiCorp.Com (http://www.DtiCorp.com) carries more than 35,000 HVAC products, including industrial, commercial and residential parts and equipment from Honeywell, Johnson Contols, Robertshaw, Jandy, Grundfos, Armstrong and more. Our online catalog is easy to navigate and search, and all products have a picture and a description. If a customer has any questions about a product, they can call 800-757-5999 and speak with one of our product experts. Our mission is to offer the best prices anywhere to our customers.

Julian Arhire

Manager DtiCorp.com

Phone: 954.484.2929


Fax: 954.206.0767

Web: http://www.DtiCorp.com

New Honeywell HVAC Warranty Policy From DtiCorp.com

Fort Lauderdale, FL – Popular Honeywell online retailer DtiCorp.com (http://www.DtiCorp.com) is introducing the new Honeywell HVAC Warranty Policy. HVAC (Heating, Ventilating, and Air Conditioning) refers to technology of indoor environmental comfort. HVAC system design is a major subdiscipline of mechanical engineering, based on the principles of thermodynamics, fluid mechanics, and heat transfer. Refrigeration is sometimes added to the field’s abbreviation as HVAC&R or HVACR, or ventilating is dropped as in HACR (such as the designation of HACR-rated circuit breakers).

General

Honeywell warrants all new products to be free from defects due to workmanship or materials, under normal use and service, for the following warranty periods. Honeywell VisionPRO®, Commercial VisionPRO™, FocusPRO®, PRO 4000, PRO 3000, LineVolt™ PRO, Digital Round™, and Modern Round ™ (T87K, N) Series Thermostats with a date code of 0501 or later: sixty (60) months from date of installation. CommercialPRO, PRO 2000 and PRO 1000 thermostats: twenty-four (24) months from date of installation. All other Honeywell thermostats and thermostats with a date code of 0452 or earlier: twelve (12) months from date of installation, unless specified otherwise. Honeywell Air Cleaners, Humidifiers, Ventilators, Ultraviolet Treatment and Zoning Products with a date code of 0501 or later, excluding replacement maintenance parts: sixty (60) months from date of installation. Indoor air quality parts F50, F52, F300, F200, F150, UV100E, HE225, HE265, HE365, with date codes of 0452 or earlier, excluding replacement maintenance parts: sixty (60) months from date of installation. All other Honeywell indoor air quality and zoning products with a date code of 0452 or earlier: twenty-four (24) months from date of installation, unless specified otherwise. Variable frequency drive devices (VFD) and accessories: new products for thirty-six (36) months and factory refurbished drives for twelve (12) months from date of installation when start-up and commissioning is performed by Honeywell VFD Authorized and trained personnel. All VFD warranty return products must have prior authorization (Form No. 87-0284) and be returned only to the VFD Service Center in Chattanooga, TN. MS, MN and Fact Acting 2-position Direct Coupled Actuators: sixty (60) months from date of installation. The warranty period for all other products is twelve (12) months from date of installation. If a product is defective due to workmanship or materials, is removed within the applicable warranty period, and is returned to Honeywell in accordance with the procedure described below, Honeywell will, at its option, either repair, replace or credit the customer for the purchase price of the product, in accordance with the procedure described below. This warranty extends only to persons or organizations who purchase products for resale. The expressed warranty above constitutes the entire warranty of Honeywell with respect to the products in the catalog and IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL HONEYWELL BE RESPONSIBLE FOR ANY CONSEQUENTIAL DAMAGES OF ANY NATURE WHATSOEVER.

INSTRUCTIONS – INSTALLING OR SERVICING CONTRACTOR OR DEALER

When replacing a Honeywell product under warranty, including those products furnished on original heating and/or cooling equipment, you should rely on your local Honeywell Wholesaler or Distributor for prompt and efficient product replacement service.A Honeywell Returned Goods Identification Tag (form 87-0030) or an electronic data notification system must be completed and approved by the servicing dealer/contractor prior to submitting the product to the Honeywell Wholesaler or Distributor. (Tags may be obtained from the Wholesaler or Distributor in advance.) No warranty claim for product replacement or credit will be honored by the Wholesaler/Distributor without a completed warranty tag attached or electronic notification.

INSTRUCTIONS – WHOLESALER OR DISTRIBUTOR

The following will apply to the return of any product to Honeywell under the warranty. Any products which are not variable frequency drives and are:

(i) identified with Honeywell’s Returned Goods Identification Tag (form 87-0030), or electronic notification system;

(ii) are listed individually with Returned Goods ID Tag numbers and date codes listed on Honeywell’s Returned Goods Order (form 71-96024) or a similar form;

(iii) packed separately from other returns and protected from shipping damage;


(iv) have certification by the installer or servicing dealer that the product was removed, due to failure, within the applicable warranty period;

(v) are received transportation pre-paid at:

Honeywell Return Goods

Dock 4 MN10-3860

1885 Douglas Drive

Golden Valley, MN 55422

(vi) and are found by Honeywell’s inspection to be defective in workmanship or materials under normal use and service will be handled in accordance with one of the two following procedures, as specified by the customer making the return: All VFD warranty return products must have prior authorization (Form No. 87-0284) and be returned only to the VFD Service Center in Chattanooga, TN.

1. CREDIT PROCEDURE. Honeywell will issue credit, at Honeywell’s lowest wholesaler net price in effect at the time of the return (as set forth on Honeywell’s then current price sheet) or at the actual invoice amount if a copy of that invoice is attached to the packing list. (TRADELINE Replacement Exchange Products will be at Honeywell’s lowest replacement exchange net price in effect at the time Honeywell’s then current price sheet.) Honeywell reserves the right to disallow this credit option in cases of warranty abuse.


2. REPAIR OR REPLACEMENT PROCEDURE. Honeywell will, at its option, either repair or replace the product free of charge and return it or its replacement lowest cost transportation prepaid. The replacement will be a functionally equivalent new TRADELINE product. Premium transportation will be used at customer’s request and expense.

The warranty will not be honored if:

(i) product is damaged or missing parts or accessory items including batteries.

(ii) product exhibits evidence of field misapplications.

Final disposition of any warranty claim will be determined solely by Honeywell. If inspection by Honeywell does not disclose any defect covered by the warranty, the product will be returned or scrapped as instructed by the customer and Honeywell’s regular service charges will apply. Products returned to the customer may be sent shipping charges collect. If you have any questions relative to product returns to Honeywell, contact your Customer Care Representative:


Honeywell International Inc.

Customer Care MN10-1461

1985 Douglas Drive

Golden Valley, MN 55422

(763) 954-5720

INSTRUCTIONS – INDUSTRIAL USERS AND BUILDING OWNERS

As a user, when you purchase a Honeywell product you should expect performance from the product and, if it fails, replacement of the product by the installing dealer. Typically, you will have purchased a Honeywell product under the following circumstances:


1. To modernize or refurbish your existing commercial and/or process control system.

2. You have purchased new commercial and/or process heating, cooling, air cleaning or humidification equipment that is furnished with Honeywell controls or components

3. A control has failed on your existing commercial and/or process heating and/or cooling equipment and is replaced by a Honeywell TRADELINE product.

With few exceptions, you utilize the services of a competent plumbing, heating and/or cooling dealer/contractor for new or replacement work performed. Although the warranty does not extend to you, Honeywell does extend a warranty to your supplier. Your supplier can rely on its local Honeywell Wholesaler/Distributor or Honeywell for prompt replacement. If you have any questions, need additional information or would like to comment on Honeywell’s products or services, please write or phone:

Honeywell International Inc.


Customer Care MN10-1461

1985 Douglas Drive North

Golden Valley, MN 55422-4386

(763) 954-5720

About Us: DtiCorp.Com (http://www.DtiCorp.com) carries more than 35,000 HVAC products, including industrial, commercial and residential parts and equipment from Honeywell, Johnson Contols, Robertshaw, Jandy, Grundfos, Armstrong and more. Our online catalog is easy to navigate and search, and all products have a picture and a description. If a customer has any questions about a product, they can call 800-757-5999 and speak with one of our product experts. Our mission is to offer the best prices anywhere to our customers.

Julian Arhire

Manager DtiCorp.com


Phone: 954.484.2929

Fax: 954.206.0767

Web: http://www.DtiCorp.com

21 New Honeywell TP970 Pneumatic Thermostats From DtiCorp.com

Fort Lauderdale, FL – Popular Honeywell online retailer DtiCorp.com (http://www.DtiCorp.com) is introducing 21 brand new Honeywell TP970 pneumatic thermostats. Two-pipe, single setpoint, pneumatic thermostats used to provide proportional control of pneumatic valves and damper actuators in heating and air conditioning systems. Replacement kits are available for Johnson, Powers, Robertshaw, Barber-Colman, and older Honeywell two-pipe pneumatic thermostats.

Features:

- Honeywell’s best pneumatic thermostat-TP970 series.

- Shock-resistant, suspension-mounted thermostats provide dependable performance and responsiveness year in and year out.

- Pilot operated for high capacity.

- Direct Acting (DA) and Reverse Acting (RA) models are available.


- Wide throttling range models for Zero Energy Band (ZEB) operation are available.

- Adapter plate in Convertastat and Modernization kits covers existing thermostat wall mark.

- Backplate has molded air connections-no separate fittings needed.

- Universal locking cover with satin chrome finish and horizontal, vertical, or blank window options.

- Typical Wide Throttling Range Application.

Specifications:

- The TP970 and TP9600 are single-temperature, pilot-bleed, two-pipe thermostats. The TP970A and TP9600A are used for heating (Direct Acting [DA]), the TP970B and the TP9600B for cooling (Reverse Acting [RA]), and the TP970C and D for heating/cooling. There are TP970A and B models with Limited

Control Range (LCR) for energy conservation. The TP970C and D have a wide throttling range capability, allowing an adjustable Zero Energy Band (ZEB) between heating and cooling operations.


- The TP971A-E and TP9610A,B are two-temperature, pilotbleed, two-pipe thermostats for DAY/NITE operation, with automatic switchover from mainline pressure. The TP971C is a three-pipe thermostat for unit ventilator DAY/NITE application.


- The TP972A and TP9620A are single-temperature,pilotbleed, two-pipe thermostats with cooling/heating cycles and automatic switchover from mainline pressure. The TP972A2143 is designed specifically for replacing Johnson cooling/heating thermostats

- The TP973A, B and TP9630A,B are one- or two-pipe bleedtype thermostats for heating or cooling applications.

- The TP974A is a pneumatic space temperature sensor for either one- or two-pipe applications. It is suitable as a remote temperature indicator or as the sensor for a receiver controller.

- The TP978 is a dual-element bleed-type thermostat used in dual one-pipe applications, suitable for use with variable volume systems. These thermostats may be used to control separate heating and cooling actuators in sequence, with a Zero Energy Band (ZEB) for energy conservation. The heating setpoint is limited to 73F (23C) maximum, and the cooling setpoint is limited to 77F (25C) minimum. Heating and cooling are available in both DA and RA configurations. Except for the TP978E, there are no upgraded replacements for the TP978.

- The TP979 contains two cooling/heating, DAY/NITE thermostats. They are one- or two-temperature, two-pipe thermostats for independent proportioning control of heating and cooling.

Pneumatic Cover Kits (Order Cover Separately)

- 14004406-910 Satin Chrome Kit works with TP970, TP971, TP972, TP973, TP974


- 14004406-910C Satin Chrome Kit works with TP970, TP971, TP972, TP973, TP974

- 14004406-910H Satin Chrome Kit works with HP970, HP971, HP972


- 14004407-910 Beige Kit works with TP970, TP971, TP972, TP973, TP974

- 14004407-910C Beige Kit works with TP970, TP971, TP972, TP973, TP974

- 14004787-910 Bright Chrome Kit works with TP970, TP971, TP972, TP973, TP974

- 14004878-910 White Kit works with TP970, TP971, TP972, TP973, TP974

- 14004910-001 works with TP9600

- 14004910-004 works with TP9600

Models available:

1. TP970A2004 Pneumatic Thermostat Direct Acting, Heating

2. TP970A2012 Pneumatic Thermostat Direct Acting, Heating


3. TP970A2020 Pneumatic Thermostat Direct Acting, Heating

4. TP970A2038 Pneumatic Thermostat Direct Acting, Heating

5. TP970A2053 Pneumatic Thermostat Direct Acting, Heating

6. TP970A2145 Pneumatic Thermostat Direct Acting, Heating

7. TP970A2152 Pneumatic Thermostat Direct Acting, Heating


8. TP970A2234 Pneumatic Thermostat Direct Acting, Heating

9. TP970A2242 Pneumatic Thermostat Direct Acting, Heating

10. TP970A2259 Pneumatic Thermostat Direct Acting, Heating

11. TP970A2283 Pneumatic Thermostat Direct Acting, Heating


12. TP970A2309 Pneumatic Thermostat Direct Acting, Heating

13. TP970A2317 Pneumatic Thermostat Direct Acting, Heating

14. TP970B2002 Pneumatic Thermostat Reverse Acting, Cooling

15. TP970B2010 Pneumatic Thermostat Reverse Acting, Cooling


16. TP970B2077 Pneumatic Thermostat Reverse Acting, Cooling

17. TP970B2150 Pneumatic Thermostat Reverse Acting, Cooling

18. TP970B2166 Pneumatic Thermostat Reverse Acting, Cooling

19. TP970B2182 Pneumatic Thermostat Reverse Acting, Cooling

20. TP970B2216 Pneumatic Thermostat Reverse Acting, Cooling


21. TP970C2000 Pneumatic Thermostat Direct Acting

About Us: DtiCorp.Com (http://www.DtiCorp.com) carries more than 35,000 HVAC products, including industrial, commercial and residential parts and equipment from Honeywell, Johnson Contols, Robertshaw, Jandy, Grundfos, Armstrong and more. Our online catalog is easy to navigate and search, and all products have a picture and a description. If a customer has any questions about a product, they can call 800-757-5999 and speak with one of our product experts. Our mission is to offer the best prices anywhere to our customers.

Julian Arhire

Manager DtiCorp.com

Phone: 954.298.2515

Fax: 954.206.0767

Web: http://www.DtiCorp.com

DtiCorp.com Is Introducing 29 Honeywell Two-Way Globe Valves

Fort Lauderdale, FL – Popular Honeywell online retailer DtiCorp.com (http://www.DtiCorp.com) is introducing 29 brand new Honeywell V5011 Two-Way Globe Valves. The V5011 is a two-way threaded globe valve that controls steam, water, and glycol solutions (up to 50 percent concentration) in heating or cooling HVAC applications. The valve is used in two-position and modulating control systems. The valve is not suitable for combustible gas service.

Features:

- Sizes range from 1/2 to 2 inches.

- Direct and reverse acting

- High pressure steam models with stainless steel trim

- Spring-loaded, self-adjusting packing.

- Stainless steel stem prevents corrosion.

- Valve designs provide equal percentage characteristics of flow for close control of water, and linear characteristic of flow for close control of steam or chilled water.

- Valves utilize direct mounting, electric or pneumatic linear valve actuators; Q5001 linkage with Modutrol Motor; or Q5020/Q5022A linkages with direct coupled rotary actuators to operate the valve.

- Not suitable for combustible gases.

Specifications:

- Pipe Connections: Internal NPT-threaded connections.

Seat: Stainless steel, replaceable (except V5011N3xxx 3/4 in. to 1-1/4 in. which have an integral brass seat).

- ANSI Body Class: 150 psi.

- Stem: Stainless steel.

- Plug: Brass on V5011N1xxx and V5011N3xxx for water; stainless steel on V5011N2xxx for steam.

- Stroke: 3/4 in. (20 mm).

- Approximate Leakage Rate: 0.05 percent Cv.

- Pattern: 2-way, straight-through.


- Body Material: Red brass.

- Packing: Spring-loaded, carbon fiber reinforced PTFE V-rings.

- Rangeability: 50:1 per VDI/VDE 2173.

- Pressure-Temperature Ratings:

- Water: 36°F to 248°F, 217 psi (15 bar).

248°F to 337°F, 185 psi (12.8 bar).

- Maximum Water Differential Pressure: 230 psid (15.8 bar).

- Steam: 100 psi (6.9 bar) at 337°F (V5011N2xxx).

- Maximum Differential for Quiet Water Service: 20 psid.


- Valve Flow Characteristics:

- Water: Equal percentage (V5011N1xxx, V5011N3xxx).

- Steam: Linear (V5011N2xxx).

- Valve Design Life: 250,000 full cycles at maximum rated temperature.

- Mounting: The preferred valve mounting position is with the stem vertical. For steam applications, mount with the stem at a 45 degree angle. Do not mount the valve with the stem more than 90 degrees from the vertical (pointing lower than horizontal). Scale and foreign material can collect, scoring the stem and causing packing leakage. Protect the stem from damage due to bending or scratching.

Models available:

1. V5011F1105 Two-way, Globe, 2 1/2 in, (Female) NPT, 63 Cv, Water or Glycol

2. V5011F1113 Two-way, Globe, 3 in, (Female) NPT, 100 Cv, Water or Glycol


3. V5011G1111 Two-way, Globe, 2 1/2 in, (Female) NPT, 63 Cv, Steam

4. V5011G1129 Two-way, Globe, 3 in, (Female) NPT, 100 Cv, Steam

5. V5011N1008 Two-way, Globe, 1/2 in, (Female) NPT, 0.73 Cv, Water or Glycol

6. V5011N1016 Two-way, Globe, 1/2 in, (Female) NPT, 1.16 Cv, Water or Glycol

7. V5011N1024 Two-way, Globe, 1/2 in, (Female) NPT, 1.85 Cv, Water or Glycol

8. V5011N1032 Two-way, Globe, 1/2 in, (Female) NPT, 2.9 Cv, Water or Glycol

9. V5011N1040 Two-way, Globe, 1/2 in, (Female) NPT, 4.7 Cv, Water or Glycol

10. V5011N1057 Two-way, Globe, 3/4 in, (Female) NPT, 7.3 Cv, Water or Glycol

11. V5011N1065 Two-way, Globe, 1 in, (Female) NPT, 11.7 Cv, Water or Glycol


12. V5011N1073 Two-way, Globe, 1 1/4 in, (Female) NPT, 18.7 Cv, Water or Glycol

13. V5011N1081 Two-way, Globe, 1 1/2 in, (Female) NPT, 29.3 Cv, Water or Glycol

14. V5011N1099 Two-way, Globe, 2 in, (Female) NPT, 46.8 Cv, Water or Glycol

15. V5011N2006 Two-way, Globe, 1/2 in, (Female) NPT, 0.73 Cv, Water or Glycol or Steam

16. V5011N2014 Two-way, Globe, 1/2 in, (Female) NPT, 1.16 Cv, Water or Glycol or Steam

17. V5011N2022 Two-way, Globe, 1/2 in, (Female) NPT, 1.85 Cv, Water or Glycol or Steam

18. V5011N2030 Two-way, Globe, 1/2 in, (Female) NPT, 2.9 Cv, Water or Glycol or Steam

19. V5011N2048 Two-way, Globe, 1/2 in, (Female) NPT, 4.7 Cv, Water or Glycol or Steam

20. V5011N2055 Two-way, Globe, 3/4 in, (Female) NPT, 7.3 Cv, Water or Glycol or Steam


21. V5011N2063 Two-way, Globe, 1 in, (Female) NPT, 11.7 Cv, Water or Glycol or Steam

22. V5011N2071 Two-way, Globe, 1 1/4 in, (Female) NPT, 18.7 Cv, Water or Glycol or Steam

23. V5011N2089 Two-way, Globe, 1 1/2 in, (Female) NPT, 29.3 Cv, Water or Glycol or Steam

24. V5011N2097 Two-way, Globe, 2 in, (Female) NPT, 46.8 Cv, Water or Glycol or Steam

25. V5011N3004 Two-way, Globe, 1/2 in, (Female) NPT, 2.9 Cv, Water or Glycol

26. V5011N3012 Two-way, Globe, 1/2 in, (Female) NPT, 4.7 Cv, Water or Glycol

27. V5011N3020 Two-way, Globe, 3/4 in, (Female) NPT, 7.3 Cv, Water or Glycol

28. V5011N3038 Two-way, Globe, 1 in., (Female) NPT, 11.7 Cv, Water or Glycol

29. V5011N3046 Two-way, Globe, 1-1/4 in, (Female) NPT, 18.7 Cv, Water or Glycol

About Us: DtiCorp.Com (http://www.DtiCorp.com) carries more than 35,000 HVAC products, including industrial, commercial and residential parts and equipment from Honeywell, Johnson Contols, Robertshaw, Jandy, Grundfos, Armstrong and more. Our online catalog is easy to navigate and search, and all products have a picture and a description. If a customer has any questions about a product, they can call 800-757-5999 and speak with one of our product experts. Our mission is to offer the best prices anywhere to our customers.

Julian Arhire

Manager DtiCorp.com

Phone: 954.484.2929

Fax: 954.206.0767

Web: http://www.DtiCorp.com

22 New Honeywell Series 90 Modutrol IV Motors From DtiCorp.com

Fort Lauderdale, FL - Popular Honeywell online retailer DtiCorp.com (http://www.DtiCorp.com) is introducing 22 brand new Honeywell Series 90 Modutrol IV Motors.

The Honeywell Series 90 Modutrol IV Motors are spring return and
non-spring return modulating proportional control motors. Use these
motors with controllers that provide a Series 90 output to operate
dampers or valves. When replacing a motor in a valve application, the
linkage determines the necessity of the 220738A Adapter Bracket. With
Q100, Q601 or Q618 Linkages, it is necessary to use the 220738A to raise
the motor shaft to the appropriate height. Valve applications with a
Q5001 Linkage do not require the 220738A Adapter Bracket. To operate
Honeywell V5011 two- way or V5013 three-way valves through full stroke,
use a 160° stroke motor.

Features:

- Directly replaces M934A,D, M941, M944A,C,D, M945A,D,F, M954, M965, and M975 motors.

- Oil-immersed motor and gear train for reliable performance and long life.

- Integral junction box provides NEMA 3 weather protection.

- Motor and circuitry operate from 24 Vac. Models available with factory
installed transformer, or a field-added internal transformer.

- Quick-connect terminals standard—screw terminal adapter available.

- Adapter bracket for matching shaft height of older motors standard with TRADELINE motors.

- Field adjustable stroke (90° to 160°) models available.


- Nominal timing of 30 seconds for 90° stroke and 60 seconds for 160° stroke standard. Other timings available.

- Die-cast aluminum housing.

- Integral auxiliary switches available factory mounted, or can be field added to TRADELINE® models.

- Integral spring returns motor shaft to normal position (fully open or
fully closed, depending on model) upon power interruption.

- Field addable interface modules can be mounted in the junction box to upgrade the motor to Series 70 (electronic) control.

- TRADELINE spring return motors can operate valve linkages from power
end or auxiliary end shafts for normally closed or normally open valve
applications.

Specifications:

- Designed for flame safeguard applications in commercial/industrial oil or gas burner system.

- Vibration resistant electronic drive circuit.


- Regulated by three-wire proportional controller.

- Stroke is field-adjustable to 90 or 160 degrees.

- Power or Auxiliary End: 200 lb (90.8 kg) maximum.

- Maximum Combined Load: 300 lb (136 kg).

- Maximum: 150°F (66°C) at 25% duty cycle.

- Minimum: Minus 40°F (-40°C).

- Crankshaft: 3/8 in. (9.5 mm) Square.

- Controller Type: 135 ohm, Series 90 proportioning

controller. Series 90 high or low limit controller with manual minimum
position potentiometer (with a combined total resistance of up to 500
ohms) can also be used in the control circuit.


- Motor Rotation: Normally closed. (The normal position is the position
the motor assumes with controller disconnected.) The closed position is
the limit of counterclockwise rotation as viewed from the power end of
the motor. Motor opens clockwise (as viewed from the power end). Motors
are shipped in the closed position.

- Stroke: Field adjustable from 90° to 160°. Start position of shaft
changes with adjustment of stroke. (Midpoint of stroke remains fixed as
stroke is adjusted.) Stroke is adjusted using cams located in wiring
compartment. Motors are shipped with stroke set at 90°.

- Underwriters Laboratories Inc. Listed: File No. E4436, Guide No. XAPX.

- Canadian Standards Association Certified: General Listing File No. LR1620, Guide No. 400-E.

- Timing And Torque: Motors with 2 min. timing at 90° stroke or 4 min.
timing at 160° stroke contain on-off pulsing circuitry to achieve
timing. Intermittent operation is normal.

Models available:

1. M9164A1005 120V Non-Spring Return Foot Mounted Actuator with 35 lb-in. torque

2. M9164A1013 24/120/230 V Non-Spring Return Foot Mounted Actuator with 75 lb-in. torque


3. M9164A1070 24V Non-Spring Return Foot Mounted Actuator with 35 lb-in. torque

4. M9164C1001 24V Non-Spring Return Foot Mounted Actuator with 35 lb-in. torque

5. M9164C1068 120V Non-Spring Return Foot Mounted Actuator with 35 lb-in. torque

6. M9164D1009 24V Non-Spring Return Foot Mounted Actuator with 35 lb-in. torque

7. M9174B1027 120V Non-Spring Return Foot Mounted Actuator with 75 lb-in. torque

8. M9174C1025 120V Non-Spring Return Foot Mounted Actuator with 75 lb-in. torque

9. M9174C1033 120V Non-Spring Return Foot Mounted Actuator with 75 lb-in. torque

10. M9174D1007 24V Non-Spring Return Foot Mounted Actuator with 75 lb-in. torque

11. M9182A1011 24V Spring Return Foot Mounted Actuator with 60 lb-in. torque


12. M9184A1019 24V Non-Spring Return Foot Mounted Actuator with 150 lb-in. torque

13. M9194D1003 24V Non-Spring Return Foot Mounted Actuator with 300 lb-in. torque

14. M9194E1000 24V Non-Spring Return Foot Mounted Actuator with 300 lb-in. torque

15. M9174F1001 24V Non-Spring Return Foot Mounted Actuator with 75 lb-in. torque

16. M9185F1002 24V Spring Return Foot Mounted Actuator with 60 lb-in. torque

17. M9484D1010 24 Vac Modutrol IV Motor with 150 lb-in torque rating

18. M9484E1009 24 Vac Modutrol IV Motor with 75 lb-in torque rating

19. M9484E1017 24 Vac Modutrol IV Motor with 150 lb-in torque rating


20. M9494D1000 24 Vac Modutrol IV Motor with 300 lb-in torque rating

21. M9494F1003 24 Vac Modutrol IV Motor with 300 lb-in torque rating

22. M9484F1057 24 Vac Modutrol IV Motor with 150 lb-in torque rating

About Us: DtiCorp.Com (http://www.DtiCorp.com)
carries more than 35,000 HVAC products, including industrial,
commercial and residential parts and equipment from Honeywell, Johnson
Contols, Robertshaw, Jandy, Grundfos, Armstrong and more. Our online
catalog is easy to navigate and search, and all products have a picture
and a description. If a customer has any questions about a product,
they can call 800-757-5999 and speak with one of our product experts.
Our mission is to offer the best prices anywhere to our customers.

Julian Arhire

Manager DtiCorp.com


Phone: 954.298.2515

Fax: 954.206.0767

Web: http://www.DtiCorp.com

DtiCorp.com Is Introducing 16 Honeywell Direct Coupled Actuators

Fort Lauderdale, FL - Popular Honeywell online retailer DtiCorp.com (http://www.DtiCorp.com) is introducing 16 brand new Honeywell Direct Coupled Actuators.
The Honeywell MS4110, MS7510, MS8110 S10 Series Spring Return Direct
Coupled Actuators (DCA) are used within heating, ventilating, and
air-conditioning (HVAC) systems. They can drive a variety of
quarter-turn, final control elements requiring spring return fail-safe
operation.

Features:

- Brushless DC submotor with electronic stall protection for floating/modulating models.

- Brush DC submotor with electronic stall protection for 2-position models.

- Self-centering shaft adapter (shaft coupling) for wide range of shaft sizes.

- Models available for use with two-position, single pole single throw
(spst), line- (Series 40) or low- (Series 80) voltage controls.

- Models available for use with floating or switched single-pole, double-throw (spdt) (Series 60) controls.

- Models available for use with proportional current or voltage (Series 70) controls.

- Models available with combined floating/modulating control in a single device.

- Models available with adjustable zero and span.


- Models available with line-voltage internal end switches.

- Access cover to facilitate connectivity.

- Metal housing with built-in mechanical end limits.

- Spring return direction field-selectable.

- Shaft position indicator and scale.

- Manual winding capability with locking function.

- UL (cUL) listed and CE compliant.

- All Models are plenum-rated per UL873.

Specifications:

- Field wiring 14 to 22 AWG (2.0 to 0.344 mm sq) to screw terminals, located under the removable access cover.

- Stroke: 95° ±3°, mechanically limited.

- Modulating (Series 70) or Floating (Series 60); controlled by selector switch.

- Input Impedance: 95K ohms minimum.

- Feedback Signal: 0 or 2-10 Vdc;

- Ambient: -40°F to 140°F (-40°C to 60°C).

- Shipping and Storage: -40°F to 158°F (-40°C to 70°C).

- Design Life (at Rated Voltage):

- Two-position models: 50,000 full stroke cycles; 50,000 full stroke spring returns.


- Floating and Modulating models: 60,000 full stroke cycles; 1,500,000 repositions; 60,000 full

stroke spring returns.

- Environmental Protection Ratings: NEMA2 (US Models) or IP54 (European Models) when mounted.

- Approvals: UL/cUL, UL873 Plenum Rating, File No. E4436; Guide No. XAPX, CE, C-TICK.

Models available:

1. MS4110A1002 Two-position, SPST Actuator - 88 lb-in, Spring Return , 120 Vac +/-10%, 60 Hz

2. MS4110A1200 Two-position, SPST Actuator - 88 lb-in, Spring Return , 120 Vac +/-10%, 60 Hz

3. MS4120A1001 Two-position, SPST Actuator - 175 lb-in, Spring Return , 120 Vac +/-10%, 60 Hz

4. MS4120A1209 Two-position, SPST Actuator - 175 lb-in, Spring Return , 120 Vac +/-10%, 60 Hz


5. MS4120F1006 Fast-Acting, Two-Position Actuator - 175 lb-in, Spring Return By orientation, 120 Vac +/-10%

6. MS4120F1204 Fast-Acting, Two-Position Actuator - 175 lb-in, Spring Return By orientation, 120 Vac +/-10%

7. MS4209F1007 Fast-Acting, Two-Position Actuator - 80 lb-in, Spring Return CW, 120 Vac +10%, -15%

8. MS4309F1005 Fast-Acting, Two-Position Actuator - 80 lb-in, Spring Return CCW, 120 Vac +10%, -15%

9. MS4620F1005 Fast-Acting, Two-Position Actuator - 175 lb-in, Spring Return By orientation, 230 Vac +/-10%

10. MS4620F1203 Fast-Acting, Two-Position Actuator - 175 lb-in, Spring Return By orientation, 230 Vac +/-10%

11. MS4709F1014 Fast-Acting, Two-Position Actuator - 80 lb-in, Spring Return CW, 230 Vac +/-10%

12. MS4809F1012 Fast-Acting, Two-Position Actuator - 80 lb-in, Spring Return CCW, 230 Vac +/-10%


13. MS4103A1030 Two position or SPST Spring Return 27 lb-in., 3 Nm, Direct Coupled Actuator

14. MS4103A1130 Two position or SPST Spring Return 27 lb-in., 3 Nm, Direct Coupled Actuator

15. MS4105A1030 Two position or SPST Spring Return 44 lb-in., 5 Nm, Direct Coupled Actuator

16. MS4105A1130 Two position or SPST Spring Return 44 lb-in., 5 Nm, Direct Coupled Actuator

About Us: DtiCorp.Com (http://www.DtiCorp.com)
carries more than 35,000 HVAC products, including industrial,
commercial and residential parts and equipment from Honeywell, Johnson
Contols, Robertshaw, Jandy, Grundfos, Armstrong and more. Our online
catalog is easy to navigate and search, and all products have a picture
and a description. If a customer has any questions about a product,
they can call 800-757-5999 and speak with one of our product experts.
Our mission is to offer the best prices anywhere to our customers.

Julian Arhire

Manager DtiCorp.com


Phone: 954.484.2929

Fax: 954.206.0767

Web: http://www.DtiCorp.com

DtiCorp.com Is Introducing 150 Honeywell Variable Frequency Drives

Fort Lauderdale, FL - Popular Honeywell online retailer DtiCorp.com (http://www.DtiCorp.com) is introducing 150 brand new Honeywell Variable Frequency Drives (VFD). The Honeywell SmartVFD HVAC and BYPASS

are designed specifically for commercial buildings to deliver the
energy savings that building owners and facility managers need. The SmartVFD HVAC makes installation and commissioning easy for you and energy savings easy for your customers.

The SmartVFD HVAC is a variable frequency drive designed for use in HVAC applications. The SmartVFD HVAC is designed to control the speed of HVAC pumps and fans in order to maximize energy efficiency. The SmartVFD is easy to install, communicates effectively with building control systems to minimize energy consumption. The SmartVFD BYPASS is easy to specify, select, install and commission. It is the perfect complement to the advanced capabilities of the SmartVFD HVAC. The SmartVFD BYPASS configurations
make it easy for you to select the right bypass to complete your drive
package. All configuration are available in NEMA 1, NEMA 12 and ventilated NEMA 3R.

Features:

- Start-up Wizards—All you have to do is tell the VFD whether you
have a pump or a fan, enter nominal motor information, and you are up
and running.

- Graphic Interface—The easy-to-use keypad and interface deliver
menu-driven programming and monitoring for fast, uniform commissioning.
It's also easy for the building owner or manager to learn and use,
helping to reduce service calls. Plus, a manual is built into the keypad
for easy access when needed.

- Built-in Communications—With BACnet, N2 and Modbus built in, your
customers will enjoy a lower total installed cost and reliable
communications with the building management system.

- PC Software Wizards—Commissioning, programming and troubleshooting are
all a snap thanks to these guided Startup and PID wizards.

- Built-in PLC—Another reason why SmartVFD HVAC is a great value for
your customer, the built-in PLC eliminates the need for an expensive
external controller.

- DC Choke for harmonic protection.

- Standard RIF Filter—Ensures that EMC/RFI requirements are met.

- Bypass Options—Meets specifications and system critical applications with a comprehensive bypass offering.


- Real-Time Clock—Battery included.

- Fire Mode for safe operation.

- Motor Switch Ride-Through--easy, fault-free maintenance.

Specifications:

- Enclosure classes NEMA 1 and NEMA 12.

- EMC harmonics: EN 61000-3-12 compliant.

- EMC radio frequencies: EN 61800-3 Category C2 built in. Complies with radiated and conducted emissions.

- RoHS compliant, no electrolytic capacitors, no lead in the circuit boards.

- Intelligent cooling arrangement. Control and power airflow separated.


- 100KA SCCR (Short Circuit Current Requirement) compliant

- PC Commissioning Tool for easy commissioning, monitoring, and troubleshooting.

- Energy Savings calculator to estimate cost avoidance.

- Product selection tool for selecting VFD and bypass, and creating submittal documents.

Models available:

1. HVFDSD3A0007G100 SMARTVFD HVAC,7.5 HP, 208-230 Vac, NEMA 1,Drive Alone

2. HVFDSD3A0007G200 SMARTVFD HVAC,7.5 HP, 208-230 Vac, NEMA 12,Drive Alone

3. HVFDSD3A0010G100 SMARTVFD HVAC,1 HP,208-230 Vac, NEMA 1,Drive Alone

4. HVFDSD3A0010G200 SMARTVFD HVAC,1 HP,208-230 Vac, NEMA 12,Drive Alone

5. HVFDCD1A0003F00 COMPACT VFD, 1 Phase 115Vac in/3 phase 230Vac out 0.25 HP, Full IO, Open Chassis,No EMC

6. HVFDCD1A0003L00 COMPACT VFD, 1 Phase 115Vac in/3 phase 230Vac out 0.25 HP, Limited IO, Open Chassis,No EMC

7. HVFDCD1A0005F00 COMPACT VFD, 1 Phase 115Vac in/3 phase 230Vac out 0.5 HP, Full IO, Open Chassis,No EMC

8. HVFDCD1A0005L00 COMPACT VFD, 1 Phase 115Vac in/3 phase 230Vac out 0.5 HP, Limited IO, Open Chassis,No EMC

9. HVFDCD1A0010F00 COMPACT VFD, 1 Phase 115Vac in/3 phase 230Vac out 1 HP, Full IO, Open Chassis,No EMC

10. HVFDCD1A0010L00 COMPACT VFD, 1 Phase 115Vac in/3 phase 230Vac out 1 HP, Limited IO, Open Chassis,No EMC

About Us: DtiCorp.Com (http://www.DtiCorp.com)
carries more than 35,000 HVAC products, including industrial, commercial
and residential parts and equipment from Honeywell, Johnson Contols,
Robertshaw, Jandy, Grundfos, Armstrong and more. Our online catalog
is easy to navigate and search, and all products have a picture and a
description. If a customer has any questions about a product, they can
call 800-757-5999 and speak with one of our product experts. Our mission
is to offer the best prices anywhere to our customers.

Julian Arhire

Manager DtiCorp.com

Phone: 954.484.2929

Fax: 954.206.0767

Web: http://www.DtiCorp.com

9 New Honeywell R7184 Primary Controls From DtiCorp.com | ListFree.org

Fort Lauderdale, FL - Popular Honeywell online retailer DtiCorp.com (http://www.DtiCorp.com)

is introducing 9 brand new Honeywell R7184 Primary Controls. Line
voltage, safety rated, control for residential oil fired burners used in
boilers, forced air furnaces and water heaters. When used with a CAD
cell flame sensor, operates an oil burner and optional oil valve. Can be
used with both hydronic and forced air systems. Honeywell has designed
the R7184U for easy installation and operation in both

hydronic and forced-air systems. The state of-the-art features of this
oil primary make this control truly universal, replacing all others. All
Honeywell R7184U oil primaries are EnviraCOM-enabled. EnviraCOM is a
low-cost 3-wire communication protocol that allows different devices -
such as EnviraCOM communicating thermostats, aquastats and oil primaries
- to connect and share information. So, whether you’re replacing old
controls or installing new equipment, those customers are ready for

Honeywell EnviraLINK – a communication and remote diagnostic service that links your customers' equipment with your office.

Features:

- Interrupted ignition

- Limited reset and recycle

- Diagnostic LED

- Pump priming cycle

- Displays cad cell resistance


- Valve-on and blower motor-off delay

- Disable function

- EnviraCOM enabled

- Alarm contacts

Specifications:

- Description: Electronic Oil Primary 10 in. leads, 45 seconds lock out timing and selectable valve and blower delays

- Ignition Type: Interrupted

- Lead Length (in.): 10 in.

- Lead Length (mm): 254 mm


- Timing, Safety Switch: 45 sec.

- Mounting Bracket: Mounts on standard 4 x 4 in. junction box

- Electrical Connections: Burner motor, oil valve, ignition, cad cell, limit, thermostat, alarm

- Electrical Rating; Contacts (full load): 7.4 A @ 120 Vac; 3.7 a @ 240 Vac

- Electrical Rating; Contacts (locked rotor): 44.4 A @ 120 Vac; 22.2 A @ 240 Vac

- Alarm Load Ratings (pilot duty): 2 A @ 30 Vac

- Alarm Load Ratings (resistive): 2A @ 30 Vac

- Dimensions (in.): 4 3/8 in. high x 4 1/8 in. wide x 2 1/2 in. deep

- Temperature Range (F): -40 F to +147 F


- Temperature Range (C): -40 C to +64 C

- Approvals, Underwriters Laboratories Inc: UL and cUL Component Recognized

Models available:

1. R7184A1026 Electric Oil Primary with 15 seconds lock out timing

2. R7184A1034 Electronic Oil Primary with 10 in. leads and 30 seconds lock out timing

3. R7184A1042 Electronic Oil Primary with 10 in. leads and 45 seconds lock out timing

4. R7184B1024 Electronic Oil Primary with 15 seconds lock out timing

5. R7184P1049 Electronic Oil Primary with 15 seconds lock out timing

6. R7184P1098 Electronic Oil Primary with 15 seconds lock out timing

7. R7184U1004 Electronic Oil Primary with 15 seconds lock out timing and selectable valve and blower delays

8. R7184U1012 Electronic Oil Primary with 30 seconds lock out timing and selectable valve and blower delays

9. R7184U1020 Electronic Oil Primary 10 in. leads, 45 seconds lock out timing and selectable valve and blower delays

About Us: DtiCorp.Com (http://www.DtiCorp.com)
carries more than 35,000 HVAC products, including industrial,
commercial and residential parts and equipment from Honeywell, Johnson
Contols, Robertshaw, Jandy, Grundfos, Armstrong and more. Our online
catalog is easy to navigate and search, and all products have a picture
and a description. If a customer has any questions about a product, they
can call 800-757-5999 and speak with one of our product experts. Our
mission is to offer the best prices anywhere to our customers.

Julian Arhire

Manager DtiCorp.com

Phone: 954.298.2515


Fax: 954.206.0767

Web: http://www.DtiCorp.com

DtiCorp.com Is Introducing 5 Honeywell P658 Pneumatic Switches

Fort Lauderdale, FL - Popular Honeywell online retailer DtiCorp.com (http://www.DtiCorp.com)

is introducing 5 brand new Honeywell P658 Pneumatic Switches.
Honeywell P658 are pneumatic-electric switches (P658A,B,E and F) used to
convert a pneumatic signal from a controller to an electrical switching
action (SPDT) to provide start and stop control of equipment such as
fans and pumps. Replacement devices available for Johnson, Powers,
Robertshaw, Barber-Colman, and older Honeywell pneumatic/ electric
switches.

The Honeywell P658A, B, C, E, and F Pneumatic/Electric Switches
convert a pneumatic signal from a controller or other pneumatic device
to a spdt electric switch action. The P658A, B, E, and F are used for
on/off control of fans and pumps, energizing electric heaters, day-night
control of unitary equipment, interlock functions, and control of other
electrical equipment commonly found in mechanical systems. The P658C is
intended for use with DeltaNet Systems or any system requiring
lowimpedance switching for monitoring status.

Features:

- Models available for surface or panel mounting.

- Barb protected by open cage.

- All ferrous parts plated to prevent corrosion.

- Factory calibrated setpoint field adjustable to meet job requirements.

- Neoprene diaphragm element.

Specifications:

- Operating Temperature Range:

P658A, C: -20 to 140F (-4 to 60C)

P658B: -20 to 160F (-4 to 71C)

P658E, F: 40 to 140F (4 to 60C)

Operating Humidity Range: 5 to 95% rh; 80F (27C) maximum wet-bulb temperature

- Finish:

P658A: Gray-beige cover

P658B, C, E, and F: Gray; plated ferrous parts

- Optional Accessory:


CCT2363 5/8–18 Hex Nut (for internal-enclosure mounting that extends barb outside of enclosure)

- Agency Listings:

P658A: UL Listing, Category SDYF; intended for direct separate installation in the field, CSA Listing,

Volume II.

P658B: UL File No. E49725, Category SDFY2, Component Listing

P658E, F: UL File No. E49725, Category SDFY2, Component Listing, CSA Listing, Volume I

P658C: UL Listing not applicable (low-voltage application)

Models available:

1. P658A1013 Surface Mounted Pneumatic / Electric Switch with Factory Calibrated at 10 psi.

2. P658B1012 Panel Mounted Pneumatic / Electric Switch. Factory Calibrated at 10 psi.

3. P658E1001 Panel Mounted Pneumatic / Electric Switch. No Factory Calibration.

4. P658E1167 Panel Mounted Pneumatic / Electric Switch. No Factory Calibration.

5. P658F1000 Panel Mounted Pneumatic / Electric Switch. No Factory Calibration.

About Us: DtiCorp.Com (http://www.DtiCorp.com) carries
more than 35,000 HVAC products, including industrial, commercial and
residential parts and equipment from Honeywell, Johnson Contols,
Robertshaw, Jandy, Grundfos, Armstrong and more. Our online catalog is
easy to navigate and search, and all products have a picture and a
description. If a customer has any questions about a product, they can
call 800-757-5999 and speak with one of our product experts. Our mission
is to offer the best prices anywhere to our customers.

Julian Arhire

Manager DtiCorp.com


Phone: 954.484.2929

Fax: 954.206.0767

Web: http://www.DtiCorp.com

5 New Honeywell W973 Logic Panel Temperature Controls From DtiCorp.com

Fort Lauderdale, FL - Popular Honeywell online retailer DtiCorp.com (http://www.DtiCorp.com)

is introducing 5 brand new Honeywell W973 logic panel temperature
controls. Honeywell W973 controls heating, cooling and economizer
operations in commercial air conditioning and heat pump equipment.

Features:

- Proven, reliable temperature control.

- Many flexible versions to meet your application needs.

- Panels can be used with staged gas, oil, or electric heat; modulating
gas, hot water, or steam heat; and direct expansion or modulating
chilled water cooling.

- Control up to 3 on-off heat or cool stages or up to 10 on-off heat and/or cool stages using W975 Satellite Sequencers.

- Modulating dc current signal controls economizer heating or cooling valve motors.

- T7067 Dual Set Point Thermostat/Transmitter located in controlled
space provides heating and cooling input signal based on space demand.

- C7046A sensor located in discharge air duct provides heating/cooling anticipation and economizer modulating low limit signal.


- System cycles all stages off on power interruption.

- When power is restored, system sequences required stages on with timed inter-stage delay.

Specifications:

- Applications: Packaged RTU, Furnace, Heat Pump Systems, Split Systems

- Control System: W973 single zone

- Output Type: Staged On/Off

- Compatible with: T7067 Thermostat with Q667 subbase

- Contact Ratings: NO 240 VA inrush @ 24 Vac, 60 VA running @ 24 Vac

- Contact Ratings: NC 75 VA inrush @ 24 Vac, 30 VA running @ 24 Vac


- Electrical Connections: 1/4 in. quick-connect male terminals

- Voltage: 24 Vac

- Frequency: 50, 60 Hz

- Power Consumption: 8 VA

- Operating Temperature Range: -40 F to +150 F

- Dimensions: 6- 1/4 in. high x 4 -1/8 in. wide x 2 -5/16 in. deep

- Shipping Temperature Range: -30 F to +150 F

Models available:

1. W973A1017 Logic Panel (use with T7067 and Q667), Stages 2 Heat/2 Cool

2. W973B1016 Logic Panel (use with T7067 and Q667), Stages 3 Heat/3 Cool

3. W973E1005 Logic Panel (use with T7067 and Q667), Stages 0 Heat/4 Cool

4. W973F1004 Logic Panel (use with T7067 and Q667), Stages 4 Heat/2 Cool

5. W973J1017 Logic Panel (use with T7067 and Q667), Stages 4 Heat/4 Cool

About Us: DtiCorp.Com (http://www.DtiCorp.com)
carries more than 35,000 HVAC products, including industrial,
commercial and residential parts and equipment from Honeywell, Johnson
Contols, Robertshaw, Jandy, Grundfos, Armstrong and more. Our online
catalog is easy to navigate and search, and all products have a picture
and a description. If a customer has any questions about a product, they
can call 800-757-5999 and speak with one of our product experts. Our
mission is to offer the best prices anywhere to our customers.

Julian Arhire

Manager DtiCorp.com

Phone: 954.298.2515


Fax: 954.206.0767

Web: http://www.DtiCorp.com

DtiCorp.com Is Introducing 6 Honeywell R8184 Protectorelay Oil Burner Controls

Fort Lauderdale, FL - Popular Honeywell online retailer DtiCorp.com (http://www.DtiCorp.com) is introducing 6 brand new Honeywell R8184 Protectorelay Oil Burner Controls. The Honeywell Protectorelay Oil Burner Controls operate the oil burner and oil valve (if desired) in response to a call for heat from a low voltage control circuit.

Features:

- Controls oil burner, oil valve (if desired) and the ignition transformer in response to a call for heat.

- Solid state flame sensing circuit.

- LED on terminal strip indicates system lockout.

- Remote lockout indication available on some models.

- Enclosed safety switch with external reset button.

- Manual trip lever opens safety switch for system maintenance.

- Mounts on standard 4 x 4 in. junction box; select models may be mounted directly on burner housing.

- C554A Cadmium Sulfide Flame Detector and 24 Vac thermostat required.

Specifications:

- Solid-state electronic circuitry provides low power consumption and high reliability.

- Solid-state models directly replace previous models with vacuum electron tube circuitry.

- Detectors can be mounted horizontally, vertically or at any angle. The self-checking C7012E,F models
require faceplate alignment and have integral locating reference points to assure proper shutter mechanism operation.

- Ultraviolet radiation sensing tube and quartz viewing window are field replaceable.

- Threaded conduit fitting and color-coded leadwires allow rapid electrical installation.

- Two flame detectors can be wired in parallel to reduce nuisance shutdowns in difficult flame
sighting applications.

- A swivel mount is available to facilitate flame sighting.

- Models are available with a -40°F (-40°C) rating.

- Designed for use with Honeywell Flame Safeguard Controls using Honeywell Rectification (R7247A,
R7289A, R7847A1082) and Ampli-Check Rectification (R7247B, R7847B1072) Flame Signal Amplifiers.

- C7012G models available to meet BGC (British) and DIN (German) requirements.

- Incorporate UV sensor tube checking feature; used with Honeywell Dynamic Self-Check (R7247C, R7847C) Flame Signal Amplifiers.

Models available:

1. R8184G4009 Protectorelay Oil Burner Control with 45 seconds lock out timing


2. R8184G4025 Protectorelay Oil Burner Control with 45 seconds lock out timing


3. R8184G4066 Protectorelay Oil Burner Control with 15 seconds lock out timing


4. R8184G4074 Protectorelay Oil Burner Control with 30 seconds lock out timing


5. R8184G4082 Protectorelay Oil Burner Control with 45 seconds lock out timing


6. R8184M1051 Protectorelay Oil Burner Control with 45 seconds lock out timing

About Us: DtiCorp.Com (http://www.DtiCorp.com) carries more than 35,000 HVAC products, including industrial, commercial and residential parts and equipment from Honeywell, Johnson Contols, Robertshaw, Jandy, Grundfos, Armstrong and more. Our online catalog is easy to navigate and search, and all products have a picture and a description. If a customer has any questions about a product, they can call 800-757-5999 and speak with one of our product experts. Our mission is to offer the best prices anywhere to our customers.

Julian Arhire

Manager DtiCorp.com

Phone: 954.484.2929

Fax: 954.206.0767

Web: http://www.DtiCorp.com

27 New Honeywell C7005 and Q179 Gas Pilot Burner Assemblies from DtiCorp.com

Fort Lauderdale, FL - Popular Honeywell online retailer DtiCorp.com (http://www.DtiCorp.com)

is introducing 27 New Honeywell C7005 and Q179 Gas Pilot Burner
Assemblies. Honeywell Gas Pilot Burner Assemblies include a flame rod to
prove the pilot flame. The assemblies are used with a suitable flame
safeguard control on industrial or commercial gas burners or oil burners
with gas pilots.

Features:

- Used with Honeywell controls using the flame rectification principle.

- C7005A is for continuous pilot applications.

- It includes an insulated flame rod, properly positioned relative to
the flame retention type nozzle. C7005B is similar to C7005A, but
includes an ignition electrode suitable for automatic, electric-spark
ignition, gas pilot applications.

- Individually mounted flame rod and ignition electrode in ceramic
insulators allow the head assembly to fit inside a 3-inch pipe.

- Stainless steel fins on the flame retention type pilot head provide
the correct ratio of flame rod area to ground area for maximum flame
signal, and are beneficial in stabilizing the pilot flame.

- Pilot flame retention nozzle and mixing tube are threaded internally,
1/2-14 NPT and 3/8-18 NPT, respectively, and can be assembled with
standard pipe fittings.

- Pilot can be installed in vertical, horizontal, or inclined position.


- Rajah connectors facilitate electrical connections.

Product Specifications:

- Models:

C7005A Gas Pilot and Flame Rod Assembly for continuous pilot applications; includes flame rod only.

C7005B Gas Pilot and Flame Rod Assembly for automatic pilot applications; includes flame rod and ignition electrode.

- Pilot Head:

Flame retention type with stainless steel bomb type fins. Threaded onto
1/2 x 6 inch (152 mm) pipe nipple with 1/2-14 NPT external threads.

- Type of Gas:

Models available for use with natural and propane gases.

- Insulator Brackets:

Adjustable to change location of flame rod or ignition electrode; lock securely using setscrew.

- Mixing Tube:

Inspirating (Venturi type) with primary air adjustment. Approximately
4-9/16 inches (116 mm) long, 1-3/4 inches (44.5 mm) diameter. Inlet
tapping 1/4-18 NPT; outlet tapping 3/8-18 NPT.

- Mounting:

Vertical, horizontal, or inclined.

- Dimensions:

Overall Height 13-1/2 inches (343 mm); width can be adjusted to pass through a 3-inch pipe.

Pilot Head Length 4-7/16 inches (113 mm), diameter 1-5/8 inches (41.3
mm). Spark Gap (C7005B only) 1/8 to 3/16 inch (3.2 to 4.8 mm).

- The C7005B Gas Pilot and Flame Rod Assembly includes an ignition
electrode and a flame rod. The operation of these two electrodes in a
simple electrically-operated, gas pilot installation.

- At the beginning of the starting cycle, a high voltage from the
secondary winding of the ignition transformer is applied to the ignition
electrode. A spark jumps across the outlet of the pilot burner. The
pilot gas valve is either automatically or manually opened, and the
spark ignites the gas.

- When the ignition transformer is energized, ac voltage is applied
to the flame rod through a flame safeguard control. When the pilot flame
appears, this ac voltage is changed to dc voltage through a rectifying
action. This dc voltage then operates a relay, opening the valve to the
main burner (or permitting it to be manually opened). In the event of
flame failure, flame rectification stops, the gas valves are
deenergized, the valves close, and the system shuts down.

- Approvals:

Underwriters Laboratories Inc. Listed: File No. MP268.

Canadian Standards Association Certified: C7005 only

Master file LR-95329-1.

Industrial Risk Insurers acceptable.

Models available:

1. C7005A1037 Flame Rectifier Pilot with a 0.052 in. dia. Orifice

2. C7005B1035 Flame Rectifier Pilot with a 0.052 in. dia. Orifice

3. C7005B1050 Flame Rectifier Pilot with a 0.028 in. dia. Orifice

4. Q179A1001 Flame Rectifier Pilot with a 0.025 in. dia. Orifice and I tip style

5. Q179A1035 Flame Rectifier Pilot with a 0.025 in. dia. Orifice and 45 degree right hand port and tip style

6. Q179A1050 Flame Rectifier Pilot with a 0.028 in. dia. Orifice and T tip style

7. Q179A1076 Flame Rectifier Pilot with a 0.028 in. dia. Orifice and 45 degree Y port and tip style

8. Q179A1092 Flame Rectifier Pilot with a 0.028 in. dia. Orifice and 45 degree T port and tip style

9. Q179A1118 Flame Rectifier Pilot with a 0.025 in. dia. Orifice and 45 degree left hand port and tip style

10. Q179A1126 Flame Rectifier Pilot with a 0.025 in. dia. Orifice and I tip style

11. Q179A1183 Flame Rectifier Pilot with a 0.025 in. dia. Orifice and I tip style

12. Q179B1042 Flame Rectifier Pilot with a 0.025 in. dia. Orifice and T tip style

13. Q179B1109 Flame Rectifier Pilot with a 0.025 in. dia. Orifice and 45 degree left hand port and tip style

14. Q179B1117 Flame Rectifier Pilot with a 0.025 in. dia. Orifice and 45 degree I port and tip style

15. Q179C1009 Miniature Flame Rectifier Pilot with 0.026 in. dia. Orifice, Dual Wing Rear Target Mount and D tip style

16. Q179C1025 Miniature Flame Rectifier Pilot with 0.024 in. dia. Orifice, Single Wing Rear Target Mount and L tip style

17. Q179C1033 Miniature Flame Rectifier Pilot with 0.026 in. dia. Orifice, Dual Wing Left Side Target Mount and D tip style

18. Q179C1041 Miniature Flame Rectifier Pilot with 0.026 in. dia. Orifice, Dual Wing Right Side Target Mount and D tip style

19. Q179C1058 Miniature Flame Rectifier Pilot with 0.024 in. dia. Orifice, Single Wing Left Side Target Mount and L tip style

20. Q179C1066 Miniature Flame Rectifier Pilot with 0.024 in. dia. Orifice, Single Wing Right Side Target Mount and K tip style

21. Q179C1090 Miniature Flame Rectifier Pilot with 0.016 in. dia. Orifice, Dual Wing Rear Target Mount and D tip style

22. Q179C1108 Miniature Flame Rectifier Pilot with 0.026 in. dia. Orifice, Dual Wing Rear Target Mount and D tip style

23. Q179D1008 Miniature Flame Rectifier Pilot with 0.026 in. dia. Orifice, Dual Wing Rear Target Mount and D tip style

24. Q179D1016 Miniature Flame Rectifier Pilot with 0.026 in. dia. Orifice, Dual Wing Left Side Target Mount and D tip style

25. Q179D1024 Miniature Flame Rectifier Pilot with 0.026 in. dia. Orifice, Dual Wing Right Side Target Mount and D tip style

26. Q179D1057 Miniature Flame Rectifier Pilot with 0.024 in. dia. Orifice, Single Wing Left Side Target Mount and L tip style

27. Q179D1925 Miniature Flame Rectifier Pilot with 0.016 in. dia. Orifice, Dual Wing Rear Target Mount and D tip style

About Us: DtiCorp.Com (http://www.DtiCorp.com)
carries more than 35,000 HVAC products, including industrial,
commercial and residential parts and equipment from Honeywell, Johnson
Contols, Robertshaw, Jandy, Grundfos, Armstrong and more. Our online
catalog is easy to navigate and search, and all products have a picture
and a description. If a customer has any questions about a product, they
can call 800-757-5999 and speak with one of our product experts. Our
mission is to offer the best prices anywhere to our customers.

Julian Arhire

Manager DtiCorp.com

Phone: 954.298.2515

Fax: 954.206.0767

Web: http://www.DtiCorp.com

DtiCorp.com Is Introducing 19 Honeywell C7012 Flame Detectors

Fort Lauderdale, FL - Popular Honeywell online retailer DtiCorp.com (http://www.DtiCorp.com)
is introducing 19 Honeywell C7012 Solid State Purple Peeper Ultraviolet
Flame Detectors. Solid state electronic flame detectors for use with
Honeywell Flame Safeguard controls and amplifiers. Sense ultraviolet
radiation produced by combustion of gas, oil, coal or other fuels.

Features:

- Mount horizontally, vertically or at any angle in between.

- Provide quick electrical hookup with threaded conduit fitting and color-coded leadwires.

- Reduced nuisance shutdowns by wiring two in parallel.


- C7012E1278 5 pin Brad Harrison type (formally 41307N) mating connector not supplied nor available through Honeywell.

- C7012A,E meets NEMA 4 standards with viewing window rated to 20 psi.

- C7012C,F has an explosion-proof housing for use in hazardous atmospheres with a viewing window rated to 100 psi.

Specifications:

- Solid-state electronic circuitry provides low power consumption and high reliability.

- Solid-state models directly replace previous models with vacuum electron tube circuitry.

- Detectors can be mounted horizontally, vertically or at any angle. The self-checking C7012E,F models

require faceplate alignment and have integral locating reference points to assure proper shutter mechanism operation.

- Ultraviolet radiation sensing tube and quartz viewing window are field replaceable.


- Threaded conduit fitting and color-coded leadwires allow rapid electrical installation.

- Two flame detectors can be wired in parallel to reduce nuisance shutdowns in difficult flame

sighting applications.

- A swivel mount is available to facilitate flame sighting.

- Models are available with a -40°F (-40°C) rating.

- Designed for use with Honeywell Flame Safeguard Controls using Honeywell Rectification (R7247A,

R7289A, R7847A1082) and Ampli-Check Rectification (R7247B, R7847B1072) Flame Signal Amplifiers.

- C7012G models available to meet BGC (British) and DIN (German) requirements.

- Incorporate UV sensor tube checking feature; used with Honeywell Dynamic Self-Check (R7247C, R7847C) Flame Signal Amplifiers.

Models available:

1. C7012A1145 120 Vac Flame Sensor, Ultraviolet, Purple Peeper

2. C7012A1152 120 Vac Flame Sensor, Ultraviolet, Purple Peeper

3. C7012A1160 120 Vac Flame Sensor, Ultraviolet, Purple Peeper

4. C7012A1186 208 Vac Flame Sensor, Ultraviolet, Purple Peeper

5. C7012A1194 240 Vac Flame Sensor, Ultraviolet, Purple Peeper

6. C7012C1042 120 Vac Flame Sensor, Ultraviolet, Purple Peeper, Explosion Proof

7. C7012E1104 120 Vac Flame Sensor, Ultraviolet, Purple Peeper, Self-Checking

8. C7012E1112 120 Vac Flame Sensor, Ultraviolet, Purple Peeper, Self-Checking

9. C7012E1120 120 Vac Flame Sensor, Ultraviolet, Purple Peeper, Self-Checking

10. C7012E1146 208 Vac Flame Sensor, Ultraviolet, Purple Peeper, Self-Checking

11. C7012E1153 240 Vac Flame Sensor, Ultraviolet, Purple Peeper, Self-Checking

12. C7012E1161 120 Vac Flame Sensor, Ultraviolet, Purple Peeper, Self-Checking

13. C7012E1187 220 Vac Flame Sensor, Ultraviolet, Purple Peeper, Self-Checking

14. C7012E1195 110 Vac Flame Sensor, Ultraviolet, Purple Peeper, Self-Checking

15. C7012E1203 240 Vac Flame Sensor, Ultraviolet, Purple Peeper, Self-Checking

16. C7012E1245 120 Vac Flame Sensor, Ultraviolet, Purple Peeper, Self-Checking

17. C7012E1278 120 Vac Flame Sensor, Ultraviolet, Purple Peeper, Self-Checking

18. C7012F1052 120 Vac Flame Sensor, Ultraviolet, Purple Peeper, Self-Checking, Explosion Proof

19. C7012G1019 220 Vac Flame Sensor, Ultraviolet, Purple Peeper

About Us: DtiCorp.Com (http://www.DtiCorp.com) carries more than 35,000 HVAC products,
including industrial, commercial and residential parts and equipment
from Honeywell, Johnson Contols, Robertshaw, Jandy, Grundfos, Armstrong
and more. Our online catalog is easy to navigate and search, and all
products have a picture and a description. If a customer has any
questions about a product, they can call 800-757-5999 and speak with one
of our product experts. Our mission is to offer the best prices
anywhere to our customers.

Julian Arhire

Manager DtiCorp.com

Phone: 954.484.2929

Fax: 954.206.0767


Web: http://www.DtiCorp.com

9 New Honeywell R7847 Flame Amplifiers from DtiCorp.com | ListFree.org

Fort Lauderdale, FL – Popular Honeywell online retailer DtiCorp.com (http://www.DtiCorp.com)

is introducing 9 New Honeywell R7847 Flame Amplifiers – Honeywell
solid state plug-in amplifiers that respond to flame detector inputs to
indicate the presence of flame when used with 7800 SERIES relay modules.
The R7847A,B Rectification Flame Amplifiers are solid state plug-in
amplifiers that respond to a rectified signal from a rectification type
flame detector to indicate the presence of flame when used with 7800
SERIES Relay Modules.

Features:

- Flame failure response time of 0.8 or 3.0 seconds.

- Flame signal strength ranges from 0.0 to 5.0 Vdc.

- Plug into 7800 relay module through printed circuit board edge connector keyed for proper orientation.

- Flame signal test jacks to measure amplifier flame signal voltage.

- Color-coded labels identify flame detection type. Dynamic Self-Check
Amplifier test the detectors and all electronic components in the flame
detection system 7800 SERIES relay module locks out on safety shutdown
with flame detection system failure.

- Compatible with existing Honeywell flame detectors (sold separately).

Product Specifications:

- Flame failure response time of 0.8 or 1 second; or 2.0 or 3.0 seconds, depending on the amplifier and relay module selected.

- Plug-in to 7800 SERIES and R7140 Relay Module through printed circuit board edge connector keyed

for proper orientation.

- Flame signal test jacks measure amplifier flame signal voltage.

- 0.0 to 5.0 Vdc Flame signal strength reading range.

- Color coded label identifies flame detection type:

* Green—rectification. Red—infrared.

* Purple—ultraviolet. Blue—pulsed rectification.

* White—optical.


- R7847B, R7848B, R7849B Dynamic Ampli-Check circuitry tests all flame
amplifier components 12 times per minute. The 7800 SERIES and R7140
Relay Module locks out on safety shutdown with amplifier failure.

- R7824C, Series 2 or greater and R7847C Series 4 or greater, pulse the shutter when signal of 1.5 Vac

is sensed. Display readings of 0.7 to 2.4 Vdc are common.

- R7824C, R7847C Dynamic Self-Check Rectification Amplifier, R7851C
Dynamic Self-Check Optical Flame Amplifier, R7861 Self-Check Ultraviolet
Flame Amplifier and R7886A Dynamic Self-Check Ultraviolet Amplifier
test the detectors and all electronic components in the flame detection
system 12 times per minute. The 7800 SERIES and R7140 Relay Module locks
out on safety shutdown with flame detection system failure.

Models available:

1) R7847A1025 Flame Amplifier, Rectification, FFRT: 0.8 sec or 1.0 sec, for 7800 Series Relay Modules

2) R7847A1033 Flame Amplifier, Rectification, FFRT: 2.0 sec or 3.0 sec, for 7800 Series Relay Modules

3) R7847A1074 Flame Amplifier, Rectification, FFRT: 0.8 sec or 1.0 sec, for 7800 Series & R7140 Relay Modules

4) R7847A1082 Flame Amplifier, Rectification, FFRT: 2.0 sec or 3.0 sec, for 7800 Series or R7140 Relay Modules

5) R7847B1023 Flame Amplifier, Rectification Ampli-Check, FFRT: 0.8 sec or 1.0 sec, for 7800 Series Relay Modules

6) R7847B1031 Flame Amplifier, Rectification Ampli-Check, FFRT: 2.0 sec or 3.0 sec, for 7800 Series Relay Modules

7) R7847B1064 Flame Amplifier, Rectification Ampli-Check, FFRT: 0.8 sec or 1.0 sec, for 7800 Series or R7140 Relay Modules

8) R7847B1072 Flame Amplifier, Rectification Ampli-Check, FFRT: 2.0 sec or 3.0 sec, for 7800 Series or R7140 Relay Modules

9) R7847C1005 Flame Amplifier, Dynamic Self Check for C7012E,F, for 7800 Series Relay Modules

About Us: DtiCorp.Com (http://www.DtiCorp.com) carries more than 35,000 HVAC products,
including industrial, commercial and residential parts and equipment
from Honeywell, Johnson Contols, Robertshaw, Jandy, Grundfos, Armstrong
and more. Our online catalog is easy to navigate and search, and all
products have a picture and a description. If a customer has any
questions about a product, they can call 800-757-5999 and speak with one
of our product experts. Our mission is to offer the best prices
anywhere to our customers.

Julian Arhire

Manager DtiCorp.com

Phone: 954.298.2515

Fax: 954.206.0767

Web: http://www.DtiCorp.com